Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 0911.5009

Bipolar and unipolar electrical fatigue in ferroelectric lead zirconate titanate thin films: an experimental comparison study

X. J. Lou·J. Wang
View original source ↗Read source document ↗Export metadata ↓

Abstract

By performing standard PUND (positive-up-negative-down), hysteresis-loop and dielectric measurements on the ferroelectric lead zirconate titanate (PZT) thin-film capacitors subject to bipolar/unipolar electrical cycling, we show that unipolar fatigue is evident though still less severe than bipolar fatigue conducted at the same voltage. That has been attributed to polarization retention (backswitching) induced by the residual depolarization field between the monopolar pulses where the applied field is lower than the depolarization field, and explained using the LPD-SICI model (LPD-SICI stands for local phase decomposition caused by switching-induced charge injection). The conventional view that switching does not occur during unipolar electrical cycling may need to be corrected. PUND results recorded using the pulses of the same voltage as those for repetitive fatigue cycling are not reliable if the voltage is lower than 2Vc (Vc is the saturated coercive voltage). Dielectric measurements or hysteresis-loop measurements at higher voltages (e.g. 4Vc) are more reliable ways to evaluate the degree of fatigue and could provide more valuable information in such situations. Finally, dielectric results have been used to estimate the effective thickness di of the fatigue-induced degraded (pyrochlorelike) interfacial layer after bipolar/unipolar fatigue, which has not been done so far to our best knowledge. The fact that di is still much less than the film thickness even after the most severe bipolar fatigue strongly suggests that polarization fatigue in ferroelectrics is an interface effect, not a bulk one.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

X. J. Lou, J. Wang. 2009-11-26. Bipolar and unipolar electrical fatigue in ferroelectric lead zirconate titanate thin films: an experimental comparison study. https://doi.org/10.1063/1.3463318

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗