Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1006.5462

Measuring the speed of light using beating longitudinal modes in an open-cavity HeNe laser

Daniel J. D'Orazio·Mark Pearson·Justin T. Schultz·Daniel Sidor·Micheal Best·Kenneth Goodfellow·Robert E. Scholten·James D. White
View original source ↗Read source document ↗Export metadata ↓

Abstract

We describe an undergraduate laboratory that combines an accurate measurement of the speed of light, a fundamental investigation of a basic laser system, and a nontrivial use of statistical analysis. Students grapple with the existence of longitudinal modes in a laser cavity as they change the cavity length of an adjustable-cavity HeNe laser and tune the cavity to produce lasing in the TEM$_{00}$ mode. For appropriate laser cavity lengths, the laser gain curve of a HeNe laser allows simultaneous operation of multiple longitudinal modes. The difference frequency between the modes is measured using a self-heterodyne detection with a diode photodetector and a radio frequency spectrum analyzer. Asymmetric effects due to frequency pushing and frequency pulling, as well as transverse modes, are minimized by simultaneously monitoring and adjusting the mode structure as viewed with a Fabry-Perot interferometer. The frequency spacing of longitudinal modes is proportional to the inverse of the cavity length with a proportionality constant equal to half the speed of light. By changing the length of the cavity, without changing the path length within the HeNe gas, the speed of light in air can be measured to be ($2.9972 \pm0.0002) \times 10^{8}$ m/s, which is to high enough precision to distinguish between the speed of light in air and that in a vacuum.

Explore related subjects

physics.class-phphysics.ed-ph

Keep this discovery

BibTeXRIS

Daniel J. D'Orazio, Mark Pearson, Justin T. Schultz, Daniel Sidor, Micheal Best, Kenneth Goodfellow, Robert E. Scholten, James D. White. 2010-06-28. Measuring the speed of light using beating longitudinal modes in an open-cavity HeNe laser. https://doi.org/10.1119/1.3299281

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Projection Angles of Projectiles in Sports: Qualitative Assessment of the Effects of Aerodynamic Forces or Run-Up

We examine two major factors that influence the optimum projection angle: aerodynamic forces and the effect of run-up. With respect to aerodynamics, we consider not only the drag but also the lift generated by spin during flight. By linearizing the equations of motion that include these forces, we derive perturbation solutions with respect to drag and lift coefficients and clarify their qualitative effects. The results show that both drag and lift reduce the optimum projection angle, with the latter exerting a stronger influence. To investigate the effect of run-up, we use an extended projection model in which the initial speed depends on the initial angle. Analysis of this model reveals that a stronger run-up increases the relative projection angle but decreases the launch angle observed from the ground. These findings provide a mechanical explanation for the release angle in shot put and the takeoff angle in long jump. The present study establishes a simple theoretical framework for clarifying the respective roles of aerodynamic and run-up effects in determining the optimum projection angles in sports.

physics.class-ph↗
arXiv2026

Dunkl-Based Modeling of Vibrational Modes in Lightweight Elastic Beams

Optimizing slender elastic structures for renewable energy applications requires non-classical continuum formulations capable of accounting for spatial micro-interactions without sacrificing analytical tractability. Here, we extend beam vibration mechanics by replacing standard spatial derivatives with the Dunkl differential operator. This modification introduces a reflection-coupled mathematical structure that accounts for spatial parity effects across the beam domain. We formulate the governing dynamic equations into a generalized eigenvalue problem and derive exact analytical expressions for modal characteristics under standard boundary conditions. The classical limit confirms exact convergence to classical Euler-Bernoulli formulations. Parametric analyses reveal that the Dunkl parameter acts as a reflection-induced modulation parameter, significantly shifting natural frequencies and altering the modal characteristics of higher modes. These results provide an analytical baseline for dynamic optimization in lightweight structural components.

physics.class-ph↗
arXiv2026

A purely mechanical system realizing a Coulomb-like interaction

We solve in closed form a one-dimensional relativistic system: two masses interacting only through elastic collisions with a massless mediator bouncing between them. Momenta, times, and positions are hyperbolic functions of the collision index. The mediator energy, interpreted as the pair's effective potential, obeys an exact discrete Coulomb law, $V\propto 1/r$, with a Lorentz-invariant action as coupling. A massive Newtonian mediator instead transmits a $1/r^{3}$ force; one adiabatic invariant traces both laws to the mediator's dispersion relation. Continued to negative mediator energy, the closed forms turn trigonometric, binding a one-dimensional mechanical analog of the Coulomb atom.

physics.class-ph↗