Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1006.5646

Efficiency of photodesorption of Rb atoms collected on polymer organic film in vapor-cell

Sergey N. Atutov·Viacheslav P. Chubakov·Pavel A. Chubakov·Alexander I. Plekhanov
View original source ↗Read source document ↗Export metadata ↓

Abstract

The efficiency of photodesorption of Rb atoms previously collected on polymer organic film has been studied in detail. This study was carried out in a Pyrex glass cell of which the inner surface was covered with (poly)dimethylsiloxane (PDMS) film and illuminated by a powerful flash lamp. The desorption dynamic of the Rb atoms density in the cell caused by the illumination and percentage of desorbed atoms was studied by using of Rb resonance lamp and free running diode laser as sources of probing light. It was determined that 85 percent collected chemical active Rb atoms and stored during 16 seconds in the closed cell, 75 percent in the pumped cell can be desorbed by single flash of the lamp. The number of stored atoms decays with a characteristic time of 60 min in isolated cell and with a time 12.4 minutes in a pumped cell. We believe that this efficient method of collection and fast realization of atoms or molecules could be used for enhancement of sensitivity of existed sensors for the trace detection of various elements (including toxic or radioactive ones) which is important to environmental applications, medicine or in geology. The effect might help to construct an efficient light-driven atomic source for a magneto-optical trap in a case of extremely low vapor density or very weak flux of atoms, such as artificial radioactive alkali atoms.

Explore related subjects

physics.atom-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sergey N. Atutov, Viacheslav P. Chubakov, Pavel A. Chubakov, Alexander I. Plekhanov. 2011-04-10. Efficiency of photodesorption of Rb atoms collected on polymer organic film in vapor-cell. https://doi.org/10.1140/epjd%2Fe2011-10382-3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Delay-engineered dynamical phases in a programmable non-Markovian spin oscillator

Non-Markovian dynamics offer a new route towards engineering non-equilibrium matter, where memory and feedback act as programmable resources for controlling order in time. Here we report the realization of a non-Markovian spin oscillator in a hot vapour $^{129}$Xe-Cs co-magnetometer with programmable feedback delay and gain. By tuning these parameters, we observe a hierarchy of dynamical phases, including time-crystalline response, nonlinear bifurcations, and frequency-comb formation. The measured spectra and phase boundaries are captured by linear stability analysis of delayed Bloch equations, revealing these phenomena as different manifestations of the same memory-induced instability structure. These results establish time-delayed feedback as a powerful strategy for controlling non-equilibrium phases, enabling quantum sensing, frequency referencing, and synchronization within a single spin-based platform.

physics.atom-ph↗
arXiv2026

Non-stick vacuum wall collisions with a laser-coolable molecule

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~\mu$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

physics.atom-ph↗
arXiv2026

Kinetic modeling of molecular beam formation in a cryogenic buffer-gas cell

Cryogenic buffer-gas cells are widely used to produce cold molecular beams, but the microscopic dynamics governing beam formation remain challenging to model. Here we present fully kinetic simulations of a cryogenic buffer-gas cell using the Direct Simulation Monte Carlo method implemented in the PICLas framework, treating the buffer gas and ablated molecules within a single unified model. We capture characteristic features of cryogenic buffer-gas sources, including plume cooling, directed transport toward the aperture, and the formation of a slow molecular beam, while also resolving energy transfer from the hot ablation plume to the helium buffer gas that is inaccessible to existing approaches relying on the background-gas approximation. Our results demonstrate that fully kinetic simulations can provide detailed insights into buffer-gas cell dynamics and open a route toward a systematic optimization of such sources.

physics.atom-ph↗