Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1305.1373

Soft Modes and Local Structural Transitions in Pb-free Ba(Ti0.8Zr0.2)O3-x(Ba0.7Ca0.3)TiO3 (x = 0.5): Pressure- and Temperature-dependent Raman Studies

Yu-Seong Seo·Jai Seok Ahn·Il-Kyoung Jeong
View original source ↗Read source document ↗Export metadata ↓

Abstract

We report our Raman studies of a new lead-free relaxor ferroelectrics, Ba0.85Ca0.15Ti0.9Zr0.1O3 (BCTZO). The Raman modes of BCTZO are compared with those of BaTi0.8Zr0.2O3 (BTZO), and BaTiO3 (BTO). Also, they are compared with the eigenmodes of BTO calculated by using an ab-initio quantum-mechanical frozen-phonon method. The sharp mode at 321 cm-1 of BTO, reported as a coupled mode showing an interference effect, becomes progressively broader in BTZO and BCTZO. This behavior, together with a broadening of the 527-cm-1 mode, suggests that the mode-coupling is weakened in BTZO and BCTZO. The structural transitions of BCTZO were investigated as functions of pressure at pressures below 20 GPa and of temperature at temperatures below 600 K. Three characteristic pressure-induced transitions, on each at 2.5, 5.0, and 13.0 GPa, were found. The transitions are suggested by the drastic changes in phonon modes (two softening modes, one each at ~ 300 and ~ 530 cm-1) and by the transformation of the intensity profile. A temperature-induced transition was found at a Curie temperature of ~ 380 K, where the average structure changes from tetragonal to cubic. It is accompanied by a softening mode at ~ 530 cm-1. The phonon spectrum of BCTZO suggests that its local environment is close to that of BTZO. However, the characteristic pressures of BCTZO are close to those of BTO. The sequence of pressure-induced transitions in both BCTZO and BTZO illustrate rich interplay between the long-range averaged structure and the short-range local order such that four distinguishable phases are suggested: tetragonal, locally ordered but compensated cubic, disordered cubic, and ideal cubic. We found that the critical pressures are plausibly related to the average crystal lattice.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Yu-Seong Seo, Jai Seok Ahn, Il-Kyoung Jeong. 2013-05-07. Soft Modes and Local Structural Transitions in Pb-free Ba(Ti0.8Zr0.2)O3-x(Ba0.7Ca0.3)TiO3 (x = 0.5): Pressure- and Temperature-dependent Raman Studies. https://doi.org/10.3938/jkps.62.749

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗