Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1310.8412

Wetting Boundary Conditions in Phase-Field-Based Simulation of Binary Fluids: Some Comparative Studies and New Development

Jun-Jie Huang·Haibo Huang·Xinzhu Wang
View original source ↗Read source document ↗Export metadata ↓

Abstract

We studied several wetting boundary conditions (WBCs) in the simulation of binary fluids based on phase-field theory. Five WBCs, three belonging to the surface energy (SE) formulation using the linear, cubic and sine functions (denoted as LinSE, CubSE and SinSE), the fourth using a geometric formulation (Geom), and the fifth using a characteristic interpolation (CI), were compared with each other through the study of several problems: (1) the static contact angle of a drop; (2) a Poiseuille flow-driven liquid column; (3) a wettability gradient (WG)-driven liquid column; (4) drop dewetting. It was found that while all WBCs can predict the static contact angle fairly accurately, they may affect the simulation outcomes of dynamic problems differently, depending on the driving mechanism. For the flow-driven problem, to use different WBCs had almost no effect on the flow characteristics over a large scale. But for other capillarity-driven problems, the WBC had some noticeable effects. For the WG-driven liquid column, Geom gave the most consistent prediction between the drop velocity and dynamic contact angles, and LinSE delivered the poorest prediction in this aspect. Except for Geom, the dynamic contact angle differed from the prescribed (static) one when other WBCs were used. For drop dewetting, Geom led to the most violent drop motion whereas CubSE caused the weakest motion; the initial contact line velocity was also found to be dependent on the WBC. For several problems, CubSE and SinSE gave almost the same results, and those by Geom and CI were close as well, possibly due to similar consideration in their design. Besides various comparisons, a new implementation that may be used for all WBCs was proposed to mimic the wall energy relaxation and control the degree of slip. This new procedure made it possible to allow the simulations to match experimental measurements well.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jun-Jie Huang, Haibo Huang, Xinzhu Wang. 2013-10-31. Wetting Boundary Conditions in Phase-Field-Based Simulation of Binary Fluids: Some Comparative Studies and New Development. https://doi.org/10.1002/fld.3975

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗