Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1502.02149

Mechanical Properties of La0.6Sr0.4Co0.2Fe0.8O3-d Fuel Cell Electrodes

Zhangwei Chen
View original source ↗Read source document ↗Export metadata ↓

Abstract

LSCF is a promising candidate for the cathode in SOFCs. Understanding the microstructural characteristics is crucial to its application because they predominately determine the performance and durability of the porous cathodes and hence of the SOFCs. To date little work has been reported on its mechanical properties and their correlation with the 3D microstructures. The main purpose of this research was to study the mechanical properties of both films and bulk samples, and to evaluate the effect of microstructural parameters, by means of both experimental and numerical methods. Room-temperature mechanical properties were investigated by nanoindentation. The elastic modulus of the bulk samples was found to increase from 33.8 to 174.3 GPa and hardness from 0.64 to 5.32 GPa as the porosity decreased from 0.45 to 0.05 after sintering at 900 to 1200C. It was shown that reliable measurements of the true properties of the films were obtained provided that the effects from both surface roughness and substrate were minimised to neglected levels within a certain range of indentation depth to film thickness ratio. The fracture toughnesses of bulk LSCF were determined to increase from 0.51 to 0.99 MPam0.5. The microstructures of films were characterised using FIB-SEM slice and view technique and the actual 3D microstructure models of the porous films were reconstructed based on the tomographic data obtained. Finite element modelling of the elastic modulus agreed well with the nanoindentation results. The 3D microstructures were numerically modified at constant porosity using cellular automaton method, so that the influence on elastic modulus of factors other than porosity could be evaluated. It was found that the heterogeneity of the pore structure has a significant influence on the elastic properties computed using mechanical simulation.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Zhangwei Chen. 2015-02-07. Mechanical Properties of La0.6Sr0.4Co0.2Fe0.8O3-d Fuel Cell Electrodes. https://arxiv.org/abs/1502.02149

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗