Three-Dimensional Stateful Material Implication Logic

Gina C. Adam; Brian D. Hoskins; Mirko Prezioso; Dmitri B. Strukov

Home/Archive/arXiv

arXiv · 1509.02986

Three-Dimensional Stateful Material Implication Logic

Gina C. Adam·Brian D. Hoskins·Mirko Prezioso·Dmitri B. Strukov

View original source ↗Read source document ↗Export metadata ↓

Abstract

Monolithic three-dimensional integration of memory and logic circuits could dramatically improve performance and energy efficiency of computing systems. Some conventional and emerging memories are suitable for vertical integration, including highly scalable metal-oxide resistive switching devices (memristors), yet integration of logic circuits proves to be much more challenging. Here we demonstrate memory and logic functionality in a monolithic three-dimensional circuit by adapting recently proposed memristor-based stateful material implication logic. Though such logic has been already implemented with a variety of memory devices, prohibitively large device variability in the most prospective memristor-based circuits has limited experimental demonstrations to simple gates and just a few cycles of operations. By developing a low-temperature, low-variability fabrication process, and modifying the original circuit to increase its robustness to device imperfections, we experimentally show, for the first time, reliable multi-cycle multi-gate material implication logic operation within a three-dimensional stack of monolithically integrated memristors. The direct data manipulation in three dimensions enables extremely compact and high-throughput logic-in-memory computing and, remarkably, presents a viable solution for the Feynman grand challenge of implementing an 8-bit adder at the nanoscale.

Explore related subjects

cs.ET cond-mat.mes-hall

Keep this discovery

BibTeX RIS

Gina C. Adam, Brian D. Hoskins, Mirko Prezioso, Dmitri B. Strukov. 2015-09-10. Three-Dimensional Stateful Material Implication Logic. https://arxiv.org/abs/1509.02986

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

From Grid to Chip: Power Architecture, Stability, and Flexibility of AI Data Centers

The rapid growth of artificial intelligence (AI) computing is transforming data centers into large, dynamic electrical loads. Their deployment is primarily constrained by energy availability and grid-connection capacity, which is further aggravated by the ability of power-delivery architectures, control systems, and computing workloads to operate reliably during fast grid disturbances. This article presents a technological perspective on AI data centers as grid-interactive computing systems. First, it reviews grid-integration bottlenecks, evolving connection policies, grid-code requirements, which has fostered new technological trends via spatio-temporal flexibility available through workload orchestration, cooling systems, on-site resources, and energy storage. Second, it maps the evolution of power-delivery architectures from medium-voltage grid interfaces to chip-level, discussing higher-voltage DC distribution, solid-state transformers, wide-bandgap devices, advanced chip-level power delivery, and liquid cooling. Third, it establishes a three-level stability framework spanning rack-level DC-bus dynamics, facility-level converter interactions, and system-level grid-coupled behavior. The framework connects dominant instability mechanisms, including constant power load effects, impedance interactions, forced oscillations, and operating-mode transitions, with suitable modeling, assessment, and mitigation approaches. Synthesizing these topics, this article highlights grid-to-chip co-design as a central requirement for scalable AI infrastructure, linking computing workloads, power-delivery systems, energy buffers, and grid operation.

cs.ET↗

arXiv2026

A Time-Based Readout for Vector-Matrix Multiplication in Fully Analog Memristive SNNs

Artificial neural networks rely on vector-matrix multiplications (VMMs), whose implementation in von Neumann architectures is dominated by costly data movement between memory and processing units. Spiking neural networks (SNNs) mitigate this bottleneck by performing in-memory, analog VMMs using memristive crossbar arrays. However, conventional current-mode readout circuits incur significant area and power overhead. This work proposes a fully analog readout architecture based on voltage-to-time conversion of the VMM output. By sensing the column voltage, the proposed approach avoids current-mode summing and scaling circuitry, improving area and energy efficiency. Post-layout simulations of a 10x1 SNN implemented in a 130 nm CMOS technology validate the proposed architecture, while application to a trained 64x10 SNN for digit classification further demonstrates its feasibility for SNN inference.

cs.ET↗

arXiv2026

Fractional-order hardware for neuromorphic computing: Is the order really the problem?

Does a neuromorphic system need a true power-law memory kernel, and if so, can anyone build one? Neuromorphic systems process signals spanning many timescales at once, from milliseconds to tens of seconds. Integer-order circuits buy each additional timescale with an additional state variable. Fractional-order dynamics offer a different bargain: one operator whose power-law kernel carries a continuum of timescales, tuned by one parameter, the order alpha. A fractional derivative is non-local, so evaluating it costs storage and arithmetic that grow with the retained history, where an integer-order derivative costs a constant. This review organizes the hardware literature around that cost. We derive the retained history needed to hold the truncation error below a tolerance epsilon, show that it scales as epsilon^(-1/alpha), and set beside it a second and independent limit on the direct form: in fixed point the weights themselves underflow, so word length caps the usable history however long the buffer is. The two limits move at very different rates with the order, and where they cross decides whether a word length can serve an order at all. We use both to sort published hardware into three strategies, note a fourth the numerical literature has developed and this hardware has not, and survey digital, analog and device work. Along the way we ask whether the field is worried about the right obstacle. It is not. Fabricated constant-phase devices already span the orders two groups identify as task-optimal, so the order gap has largely closed, leaving a residual gap near 0.1 and at the lower order describing cortical adaptation. What remains is a frequency-band gap of about three decades at the low end. That corner is not empty, since double-layer electrodes work there, but every device in it is discrete, and no integrable thin-film element has been characterized there.

cs.ET↗