SearcharxivSearch

arXiv · 1510.08235

The thermal and electrical properties of the promising semiconductor MXene Hf2CO2

Abstract

In this work, we investigate the thermal and electrical properties of oxygen-functionalized M2CO2 (M = Ti, Zr, Hf) MXenes using first-principles calculations. Hf2CO2 is found to exhibit a thermal conductivity better than MoS2 and phosphorene. The room temperature thermal conductivity along the armchair direction is determined to be 86.25-131.2 Wm-1K-1 with a flake length of 5-100 um, and the corresponding value in the zigzag direction is approximately 42% of that in the armchair direction. Other important thermal properties of M2CO2 are also considered, including their specific heat and thermal expansion coefficients. The theoretical room temperature thermal expansion coefficient of Hf2CO2 is 6.094x10-6 K-1, which is lower than that of most metals. Moreover, Hf2CO2 is determined to be a semiconductor with a band gap of 1.657 eV and to have high and anisotropic carrier mobility. At room temperature, the Hf2CO2 hole mobility in the armchair direction (in the zigzag direction) is determined to be as high as 13.5x103 cm2V-1s-1 (17.6x103 cm2V-1s-1), which is comparable to that of phosphorene. Broader utilization of Hf2CO2 as a material for nanoelectronics is likely because of its moderate band gap, satisfactory thermal conductivity, low thermal expansion coefficient, and excellent carrier mobility. The corresponding thermal and electrical properties of Ti2CO2 and Zr2CO2 are also provided here for comparison. Notably, Ti2CO2 presents relatively low thermal conductivity and much higher carrier mobility than Hf2CO2, which is an indication that Ti2CO2 may be used as an efficient thermoelectric material.

Explore related subjects

Keep this discovery

BibTeXRIS

Xian-Hu Zha, Qing Huang, Jian He, Heming He, Junyi Zhai, Yue Wu, Joseph S. Francisco, Shiyu Du. 2015-10-28. The thermal and electrical properties of the promising semiconductor MXene Hf2CO2. https://arxiv.org/abs/1510.08235

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci