Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1511.02448

On the Role of Elastic Strain on Electrocatalysis of Oxygen Reduction Reaction on Pt

Vijay A. Sethuraman·Deepa Vairavapandian·Manon C. Lafouresse·Tuhina A. Maark·Naba Karan·Shouheng Sun·Ugo Bertocci·Andrew A. Peterson·Gery R. Stafford·Pradeep R. Guduru
View original source ↗Read source document ↗Export metadata ↓

Abstract

The effect of elastic strain on catalytic activity of platinum (Pt) towards oxygen reduction reaction (ORR) is investigated through de-alloyed Pt-Cu thin films; stress evolution in the de-alloyed layer and the mass of the Cu removed are measured in real-time during electrochemical de-alloying of (111)-textured thin-film PtCu (1:1, atom %) electrodes. In situ stress measurements are made using the cantilever-deflection method and nano-gravimetric measurements are made using an electrochemical quartz crystal nanobalance. Upon de-alloying via successive voltammetric sweeps between -0.05 and 1.15 V vs. standard hydrogen electrode, compressive stress develops in the de-alloyed Pt layer at the surface of thin-film PtCu electrodes. The de-alloyed films also exhibit enhanced catalytic activity towards ORR compared to polycrystalline Pt. In situ nanogravimetric measurements reveal that the mass of de-alloyed Cu is approximately 210 +/- 46 ng/cm2, which corresponds to a de-alloyed layer thickness of 1.2 +/- 0.3 monolayers or 0.16 +/- 0.04 nm. The average biaxial stress in the de-alloyed layer is estimated to be 4.95 +/- 1.3 GPa, which corresponds to an elastic strain of 1.47 +/- 0.4%. In addition, density functional theory calculations have been carried out on biaxially strained Pt (111) surface to characterize the effect of strain on its ORR activity; the predicted shift in the limiting potentials due to elastic strain is found to be in good agreement with the experimental shift in the cyclic voltammograms for the dealloyed PtCu thin film electrodes.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Vijay A. Sethuraman, Deepa Vairavapandian, Manon C. Lafouresse, Tuhina A. Maark, Naba Karan, Shouheng Sun, Ugo Bertocci, Andrew A. Peterson, Gery R. Stafford, Pradeep R. Guduru. 2015-11-08. On the Role of Elastic Strain on Electrocatalysis of Oxygen Reduction Reaction on Pt. https://doi.org/10.1021/acs.jpcc.5b06096

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗