SearcharxivSearch

arXiv · 1604.07789

Frequency dependent dielectric properties of Al/ maleic anhydride (MA) /p-Si structures

Abstract

Al/ maleic anhydride (MA) /p-Si organic Schottky devices were fabricated on a p-Si semiconductor wafer by spin coating. The frequency and voltage dependent dielectric constant of Al/MA/p-Si have been investigated. Dielectric properties and electrical conductivity of contact structures have been investigated in detail by using spectroscopic technique in a wide range of frequencies and applied bias voltages at room temperature. The values of dielectric constant, dielectric loss, dielectric loss tangent, real and imaginary parts of the electrical modulus and ac electrical conductivity were found considerably sensitive to frequency and applied bias voltage especially in depletion and accumulation regions. Experimental results indicate that the values of dielectric constant show a steep decrease with increasing frequency for each voltage. The values of dielectric loss as a function of voltage show a jump, and dielectric loss decreases with decreasing voltage and increasing frequency. The weak increasing of the ac electrical conductivity on frequency is observed. The real part of electric modulus increases with increasing frequency. Also, the imaginary part of electric modulus shows a peak and the peak position shifts to higher frequency with increasing applied voltage. It can be concluded that the interfacial polarization can be more easily occurred at low frequencies and the majority of interface states at metal semiconductor interface contributes to deviation of dielectric properties of Al/MA/p-Si structures.

Explore related subjects

Keep this discovery

BibTeXRIS

S. Bilge Ocak, A. B. Selçuk, S. B. Bayram, A. Ozbay. 2015-10-05. Frequency dependent dielectric properties of Al/ maleic anhydride (MA) /p-Si structures. https://arxiv.org/abs/1604.07789

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci