Anomalous decrease of relatively large shocks and increase of the p and b values preceding the April 16, 2016 M7.3 earthquake in Kumamoto, Japan

K. Z. Nanjo; A. Yoshida

Home/Archive/arXiv

arXiv · 1609.03246

Anomalous decrease of relatively large shocks and increase of the p and b values preceding the April 16, 2016 M7.3 earthquake in Kumamoto, Japan

K. Z. Nanjo·A. Yoshida

View original source ↗Read source document ↗Export metadata ↓

Abstract

The 2016 Kumamoto earthquakes started with a magnitude (M) 6.5 quake on Apr 14 on the Hinagu fault zone (FZ), followed by active seismicity including an M6.4 quake. Eventually, an M7.3 quake occurred on Apr 16 on the Futagawa FZ. We investigated if any sign indicative of the M7.3 quake could be found in the space-time changes of seismicity after the M6.5 quake. We determined in advance the threshold magnitude, above which all earthquakes are completely recorded. We then showed that the occurrence rate of relatively large (M >= 3) earthquakes significantly decreased 1 day before the M7.3 quake. Significance of this decrease was evaluated by one standard deviation of sampled changes in the rate of occurrence. We next confirmed that seismicity with M >= 3 was well modeled by the OU law with p ~ 1.5 +/- 0.3, which indicates that the temporal decay of seismicity was significantly faster than a typical decay with p = 1. The larger p value was obtained when we used data of the longer time period in the analysis. This significance was confirmed by a bootstrapping approach. Our detailed analysis shows that the large p value was caused by the rapid decay of the seismicity in the northern area around the Futagawa FZ. Application of the slope (the b value) of the GR frequency-magnitude distribution to the spatiotemporal change in the seismicity revealed that the b value in the northern area increased significantly, the increase being db = 0.3-0.5. Significance was verified by a statistical test of db and a test using bootstrapping errors. Based on our findings, combined with the results obtained by a stress inversion analysis performed by the NIED, we suggested that stress near the Futagawa FZ had reduced just prior to the occurrence of the M7.3 quake. We proposed, with some other observations, that a reduction in stress might have been induced by growth of the slow slips on the Futagawa FZ.

Explore related subjects

physics.geo-ph

Keep this discovery

BibTeX RIS

K. Z. Nanjo, A. Yoshida. 2016-09-12. Anomalous decrease of relatively large shocks and increase of the p and b values preceding the April 16, 2016 M7.3 earthquake in Kumamoto, Japan. https://arxiv.org/abs/1609.03246

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Holistic law of aftershocks

The paper is devoted to the phenomenological theory of aftershocks occurring in the source of a tectonic earthquake following the main shock. The theory was developed by the author jointly with A.D. Zavyalov and O.D. Zotov during the course of a long-term study of aftershocks. The theory is based on the concepts of source deactivation and the source's proper time. The holistic law governing the decay of aftershock activity over proper time follows from the theory. The damping decrement is equal to the source deactivation coefficient. The main focus of this paper is the analysis of the logical structure of the theory. The paper also contains a brief description of the experimental results obtained using the theory. Keywords: earthquake source, aftershocks, Omori's law, Utsu's law, deactivation coefficient, proper time, underground clock, foreshock convergence, aftershock divergence.

physics.geo-ph↗

arXiv2026

Bayesian deep learning integration of geophysical and drilling data for 3D prediction of copper mineralization and drill targeting: a case study from the Kogodai prospect, Rudny Altai

Exploration drill targeting in structurally complex terranes is hindered by sparse sampling, heterogeneous datasets, and the ambiguity of geophysical inversions. Here, we present an uncertainty-aware 3D workflow for the acceleration of time-to-discovery in brownfield explorations and apply it to the Kogodai prospect in the Rudny Altai metallogenic province. We jointly analyse existing drilling and geophysical data in a comprehensive approach, revealing hidden patterns in already available data. Drillholes and trenches were desurveyed to a common 3D reference frame, and assays were composited to a consistent spatial support to facilitate joint modelling with geophysical inputs. We develop Bayesian deep-learning models to predict 3D fields of Cu grade together with chargeability and apparent resistivity while quantifying epistemic uncertainty via Monte Carlo sampling. The original contribution of this work is to treat the problem not as pointwise regression between co-located observations, but as joint learning of spatially continuous 3D fields from sparse, heterogeneous exploration evidence. The resulting 3D predictions delineate a principal mineralized trend and several localized candidate zones that coincide with elevated induced polarization (IP) responses, while uncertainty mapping highlights where predictions are robust versus where additional drilling would be most informative. The continuous Cu-grade field can also be thresholded to produce binary prospectivity maps, allowing the sensitivity of target delineation to the chosen cutoff to be evaluated. The outputs are intended for qualitative interpretation and risk-aware drill targeting rather than resource estimation, and we discuss key limitations arising from incomplete provenance metadata for geophysical products and heterogeneity of historical sampling.

physics.geo-ph↗

arXiv2026

PyelogP: Automated Energy-Based Determination of Preconsolidation Pressure in Clay Deposits

Estimating the preconsolidation pressure ($\sigma'_p$) from one-dimensional consolidation (oedometer) tests is critical in geotechnical engineering for settlement analysis. Traditional graphical methods, such as the Casagrande procedure, may introduce uncertainties, particularly when interpreting rounded $e$-log($P$) curves typical of disturbed specimens of soft clays and silt deposits. This paper introduces PyelogP, an open-source Python library designed to calculate $\sigma'_p$ using the strain-energy method proposed by Becker et al. (1987) as an automated and reproducible alternative. The algorithm combines natural cubic spline interpolation, knee-point detection via the Kneedle algorithm, and split-point linear regression within the work-pressure space. Physically informed thresholds, including overconsolidation ratio limits and second-derivative maxima (${d^2 e}/{d(\log \sigma')^2}$), are incorporated to establish pre-yield and post-yield fitting boundaries. The performance of PyelogP is evaluated against a suite of 22 experimental consolidation datasets covering various clay deposits, including Saint-Alban clay and San Francisco Old Bay Clay. The results demonstrate strong agreement with the published values ($R^2$ = 0.912, RMSE = 0.374, MBE = -0.080), while the $O(N^2)$ algorithm requires only a few milliseconds per curve for typical oedometer datasets and less than 150 milliseconds for the largest datasets.

physics.geo-ph↗