SearcharxivSearch

arXiv · 1708.06944

Influence of the approach boundary layer on the flow over an axisymmetric hill at a moderate Reynolds number

Abstract

Large Eddy Simulations of a flow at a moderate Reynolds number over and around a three-dimensional hill have been performed. The main aim of the simulations was to study the effects of various inflow conditions (boundary layer thickness and laminar versus turbulent boundary layers) on the flow behind the hill. The main features of the flow behind the hill are similar in all simulations, however various differences are observed. The topology of the streamlines (friction lines) on the surface adjacent to the lower wall was found to be independent of the inflow conditions prescribed and comprised four saddle points and four nodes (of which two are foci). In all simulations a variety of vortical structures could be observed, ranging from a horseshoe vortex - that was formed at the foot of the hill - to a train of large hairpin vortices in the wake of the hill. In the simulation with a thick incoming laminar boundary layer also secondary vortical structures (i.e. hairpin vortices) were observed to be formed at either side of the hill, superposed on the legs of the horseshoe vortex. Sufficiently far downstream of the hill, at the symmetry plane the mean velocity and the rms of the velocity fluctuations were found to become quasi-independent of the inflow conditions, while towards the sides the influence of the hill decreases and the velocity profiles recover the values prevailing at the inflow.

Explore related subjects

Keep this discovery

BibTeXRIS

Manuel Garcia-Villalba, Jan G. Wissink, Wolfgang Rodi. 2017-08-23. Influence of the approach boundary layer on the flow over an axisymmetric hill at a moderate Reynolds number. https://doi.org/10.1080/14685241003702449

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn