Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1711.07776

Thickness-dependence of the Dzyaloshinskii-Moriya interaction in Co2FeAl ultrathin films: effects of the annealing temperature and the heavy metal material

M. Belmeguenai·Y. Roussigné·S. M. Chérif·A. Stashkevich·M. Nasui·M. Gabor·A. Mora-Hernández·B. Nicholson·O. -O. Inyang·A. T. Hindmarch·L. Bouchenoire
View original source ↗Read source document ↗Export metadata ↓

Abstract

Interfacial Dzyaloshinskii-Moriya interaction (iDMI) has been investigated in Co2FeAl (CFA) ultrathin films of various thicknesses (0.8 nm<tCFA<2 nm) grown on Si substrates, using Pt, W, Ir and MgO buffer or/and capping layers. Vibrating sample magnetometry revealed that magnetization at saturation (Ms) for the Pt and Ir buffered films is higher than the usual Ms of CFA due to the proximity induced magnetization (PIM) in Ir and Pt, estimated to be 19% and 27%, respectively. The presence of PIM in these materials is confirmed using x-ray resonant magnetic reflectivity. Moreover, while no PIM is induced in W, higher PIM is obtained with Pt when it is used as buffer layer rather than capping layer. Brillouin light scattering (BLS) in the Damon-Eshbach geometry has been used to investigate iDMI constants and the perpendicular anisotropy field versus the annealing temperature. The DMI sign has been found to be negative for Pt/CFA and Ir/CFA while it is positive for W/CFA. The thickness dependence of the effective iDMI constant for stacks involving Pt and W shows the existence of two regimes similarly to that of the perpendicular anisotropy constant due to the degradation of the interfaces as the CFA thickness approaches the nanometer. The surface iDMI and anisotropy constants of each stack have been determined for the thickest samples where a linear thickness dependence of the effective iDMI constant and the effective magnetization has been observed. The interface anisotropy and iDMI constants, investigated for Pt/CFA/MgO system, showed different trends with the annealing temperature. The decrease of iDMI constant with increasing annealing temperature is probably due to the electronic structure changes at the interfaces, while the increase of the interface anisotropy constant is coherent the interface quality and disorder enhancement.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

M. Belmeguenai, Y. Roussigné, S. M. Chérif, A. Stashkevich, M. Nasui, M. Gabor, A. Mora-Hernández, B. Nicholson, O. -O. Inyang, A. T. Hindmarch, L. Bouchenoire. 2017-11-21. Thickness-dependence of the Dzyaloshinskii-Moriya interaction in Co2FeAl ultrathin films: effects of the annealing temperature and the heavy metal material. https://doi.org/10.1103/physrevapplied.9.044044

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗