SearcharxivSearch

arXiv · 1712.01819

Discrimination of the DPRK underground explosions and their aftershocks using the P/S spectral amplitude ratio

Abstract

We have estimated the performance of discrimination criterion based on the P/S spectral amplitude ratios obtained from six underground tests conducted by the DPRK since October 2006 and six aftershocks induced by the last two explosions. Two aftershocks were detected in routine processing at the IDC. Three aftershocks were detected by a prototype waveform cross correlation procedure with explosions as master events, and one aftershock was found with the aftershocks as master event. Two seismic arrays USRK and KSRS of the IMS and two non-IMS 3-C stations SEHB (South Korea) and MDJ (China) were used. With increasing frequency, all stations demonstrate approximately the same level of deviation between the Pg/Lg spectral amplitude ratios belonging to the DPRK explosions and their aftershocks. For a single station, simple statistical estimates show that the probability of any of six aftershocks not to be a sample from the explosion population is larger than 99.996% at the KSRS and even larger at USRK. The probability of any of the DPRK explosion to be a representative of the aftershock population is extremely small as defined by the distance of 20 and more standard deviations to the mean explosion Pg/Lg value. For network discrimination, we use the Mahalanobis distance combining the Pg/Lg estimates at three stations: USRK, KSRS and MDJ. At frequencies above 4 Hz, the (squared) Mahalanobis distance, D2, between the populations of explosions and aftershocks is larger than 100. In the frequency band between 6 and 12 Hz at USRK, the aftershocks distance from the average explosion D2>21,000. Statistically, the probability to confuse explosions and aftershocks is negligible. These discrimination results are related only to the aftershocks of the DPRK tests and cannot be directly extrapolated to the population of tectonic earthquakes in the same area.

Explore related subjects

Keep this discovery

BibTeXRIS

Ivan Kitov, Mikhail Rozhkov. 2017-12-05. Discrimination of the DPRK underground explosions and their aftershocks using the P/S spectral amplitude ratio. https://arxiv.org/abs/1712.01819

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Holistic law of aftershocks

The paper is devoted to the phenomenological theory of aftershocks occurring in the source of a tectonic earthquake following the main shock. The theory was developed by the author jointly with A.D. Zavyalov and O.D. Zotov during the course of a long-term study of aftershocks. The theory is based on the concepts of source deactivation and the source's proper time. The holistic law governing the decay of aftershock activity over proper time follows from the theory. The damping decrement is equal to the source deactivation coefficient. The main focus of this paper is the analysis of the logical structure of the theory. The paper also contains a brief description of the experimental results obtained using the theory. Keywords: earthquake source, aftershocks, Omori's law, Utsu's law, deactivation coefficient, proper time, underground clock, foreshock convergence, aftershock divergence.

physics.geo-ph

Bayesian deep learning integration of geophysical and drilling data for 3D prediction of copper mineralization and drill targeting: a case study from the Kogodai prospect, Rudny Altai

Exploration drill targeting in structurally complex terranes is hindered by sparse sampling, heterogeneous datasets, and the ambiguity of geophysical inversions. Here, we present an uncertainty-aware 3D workflow for the acceleration of time-to-discovery in brownfield explorations and apply it to the Kogodai prospect in the Rudny Altai metallogenic province. We jointly analyse existing drilling and geophysical data in a comprehensive approach, revealing hidden patterns in already available data. Drillholes and trenches were desurveyed to a common 3D reference frame, and assays were composited to a consistent spatial support to facilitate joint modelling with geophysical inputs. We develop Bayesian deep-learning models to predict 3D fields of Cu grade together with chargeability and apparent resistivity while quantifying epistemic uncertainty via Monte Carlo sampling. The original contribution of this work is to treat the problem not as pointwise regression between co-located observations, but as joint learning of spatially continuous 3D fields from sparse, heterogeneous exploration evidence. The resulting 3D predictions delineate a principal mineralized trend and several localized candidate zones that coincide with elevated induced polarization (IP) responses, while uncertainty mapping highlights where predictions are robust versus where additional drilling would be most informative. The continuous Cu-grade field can also be thresholded to produce binary prospectivity maps, allowing the sensitivity of target delineation to the chosen cutoff to be evaluated. The outputs are intended for qualitative interpretation and risk-aware drill targeting rather than resource estimation, and we discuss key limitations arising from incomplete provenance metadata for geophysical products and heterogeneity of historical sampling.

physics.geo-ph

PyelogP: Automated Energy-Based Determination of Preconsolidation Pressure in Clay Deposits

Estimating the preconsolidation pressure ($\sigma'_p$) from one-dimensional consolidation (oedometer) tests is critical in geotechnical engineering for settlement analysis. Traditional graphical methods, such as the Casagrande procedure, may introduce uncertainties, particularly when interpreting rounded $e$-log($P$) curves typical of disturbed specimens of soft clays and silt deposits. This paper introduces PyelogP, an open-source Python library designed to calculate $\sigma'_p$ using the strain-energy method proposed by Becker et al. (1987) as an automated and reproducible alternative. The algorithm combines natural cubic spline interpolation, knee-point detection via the Kneedle algorithm, and split-point linear regression within the work-pressure space. Physically informed thresholds, including overconsolidation ratio limits and second-derivative maxima (${d^2 e}/{d(\log \sigma')^2}$), are incorporated to establish pre-yield and post-yield fitting boundaries. The performance of PyelogP is evaluated against a suite of 22 experimental consolidation datasets covering various clay deposits, including Saint-Alban clay and San Francisco Old Bay Clay. The results demonstrate strong agreement with the published values ($R^2$ = 0.912, RMSE = 0.374, MBE = -0.080), while the $O(N^2)$ algorithm requires only a few milliseconds per curve for typical oedometer datasets and less than 150 milliseconds for the largest datasets.

physics.geo-ph