Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1803.10502

A five-equation model for the simulation of miscible and viscous compressible fluids

Ben Thornber·Michael Groom·David Youngs
View original source ↗Read source document ↗Export metadata ↓

Abstract

Typical multispecies compressible Navier-Stokes computations employ conservative equations for mass fraction transport. Upwind discretisations of these governing equations produce spurious pressure oscillations at diffuse contact surfaces between gases of differing ratio of specific heat capacities which degrade the convergence rate of the algorithm. Adding quasi-conservative equations for volume fraction can solve this error, however this approach has been derived only for immiscible fluids. Here, a five-equation quasi-conservative model is proposed that includes the effects of species diffusion, viscosity and thermal conductivity. The derivation of the model is presented, along with a numerical method to solve the governing equations at second order accuracy in space and time. Formal convergence studies demonstrate the expected order of accuracy is achieved for three benchmark problems, cross-validated against two standard mass fraction models. In these test cases, the new model has between 2 and 10 times lower error for a given grid size. Simulations of a two-dimensional air-SF_6 Richtmyer-Meshkov instability demonstrate that the new model converges to the solution with four times fewer points in each direction when compared to the mass fraction model in an identical numerical framework. This represents an ~40 times lower computational cost for an equivalent error in two-dimensional computations. The proposed model is thus very suitable for Direct Numerical Simulation and Large Eddy Simulation of compressible mixing.

Explore related subjects

physics.comp-ph

Keep this discovery

BibTeXRIS

Ben Thornber, Michael Groom, David Youngs. 2018-03-28. A five-equation model for the simulation of miscible and viscous compressible fluids. https://doi.org/10.1016/j.jcp.2018.06.028

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A Geometrically Parameterized Quasi-Stationary 3D Model for High-Frequency Induction Tube Welding

A three-dimensional multiphysics finite element framework for the simulation of high-frequency induction welding of tubes is presented. The model couples a time-harmonic magnetic scalar potential formulation with a stabilized quasi-stationary advection-diffusion heat transport equation, enabling accurate prediction of electromagnetic and thermal fields under industrial operating conditions. The framework incorporates parameterized geometry generation and semi-automated, physics-tailored mesh construction and is implemented using the open-source tools GetDP and Gmsh. Validation against measurements from a commercial induction welding line for AISI 304 stainless steel tubes demonstrates good agreement with operating data. The validated model is subsequently applied to investigate the influence of impeder material by comparing a conventional FeNiZnV ferrite with the soft magnetic composite Ferrotron 559H for the induction welding of AISI 304 stainless steel tubes.

physics.comp-ph↗
arXiv2026

Stress-Testing Dynamical and Generative Downscaling Using Subseasonal Extreme Precipitation Forecasts

Coarse spatial resolution limits the ability of subseasonal prediction models to resolve extreme precipitation. Downscaling with either dynamical or deep generative models can overcome this issue, but the comparative performance of these models for extremes across different atmospheric regimes remains poorly understood. In this work, we evaluate the Weather Research and Forecasting (WRF) model against a diffusion-based generative model by downscaling two physically distinct, extreme precipitation events up to lead times of 3 weeks. For a fair comparison with WRF, which can downscale boundary conditions from different driving models without model-specific training, the diffusion model is trained in an unpaired fashion. Both approaches improve upon the raw European Centre for Medium-Range Weather Forecasts forecasts, in comparison to fused rain gauge-radar observations in Switzerland (CombiPrecip), but exhibit regime-dependent strengths. WRF achieves the highest probabilistic skill for a multicell, non-stationary event. Conversely, the diffusion model is more consistent across different performance metrics for the two events, outperforming WRF in a more stationary supercell event. These results demonstrate that explicit dynamical modeling can add value for specific precipitation events for subseasonal lead times, and that generative downscaling adds value more broadly in different situations.

physics.comp-ph↗
arXiv2026

Nonlinear flame describing function and mean shift kinematics of slit flames under combined axial-transverse forcing

This study investigates the nonlinear kinematics of a premixed slit flame using a two-dimensional $G$-equation level-set framework. Results show that combined forcing induces nonlinear saturation in the FDF, characterized by early gain flattening and premature phase drops, which intensify with the transverse forcing amplitude. Kinematic analysis reveals that this geometric nonlinearity manifests as a reduction in the time-averaged flame height, defined as the mean shift. In the quasi-steady limit, this mean shift is analytically quantified via a multivariate asymptotic expansion, where fourth-order terms successfully capture the saturation mechanism at elevated amplitudes. By introducing a scaling parameter to account for transverse dominance, the frequency-dependent decay of the mean shift in the compact limit collapses onto a single master curve, enabling the derivation of a unified theoretical model that integrates this asymptotic response with a second-order low-pass filter. Furthermore, because the mean shift reduces the physical extent of the flame, it alters the wrinkle propagation time. Correcting the Strouhal number using the measured mean shift collapses the dispersed nonlinear FDF curves onto the linear theory prediction. The analysis is further extended to disturbances convected at a finite speed, for which the linear transfer function is derived analytically and the correction with the measured mean shift continues to collapse the nonlinear FDF. These findings establish that the nonlinear FDF behavior under multidimensional forcing is fundamentally governed by the kinematic mean shift, providing a theoretical baseline for decoupling geometric nonlinearities from other thermo-diffusive or hydrodynamic instabilities in turbulent flames.

physics.comp-ph↗