Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1805.07391

Investigations of optical pumping for magnetometry using an auto-locking laser system

Alexander Pouliot·Hermina C. Beica·Adam Carew·Andrejs Vorozcovs·Gehrig Carlse·Brynle Barrett·Anantharaman Kumarakrishnan
View original source ↗Read source document ↗Export metadata ↓

Abstract

We have developed a versatile pulsed laser system for high precision magnetometry. The operating wavelength of the system can be configured to optically pump alkali vapors such as rubidium and cesium. The laser system consists of an auto-locked, interference filter stabilized, external cavity diode laser (ECDL), a tapered waveguide amplifier, and a pulsing module. The auto-locking controller can be used by an untrained operator to stabilize the laser frequency with respect to a library of atomic, molecular, and solid-state spectral markers. The ECDL output can be amplified from 20 mW to 2 W in continuous wave (CW) mode. The pulsing module, which includes an acousto-optic modulator (AOM), can generate pulses with durations of 20 ns and repetition rates of several MHz. Accordingly, the laser system is well suited for applications such as gravimetry, magnetometry, and differential-absorption lidar. In this work, we focus on magnetometric applications and demonstrate that the laser source is suitable for optically pumping rubidium vapor. We also describe numerical simulations of optical pumping relevant to the rubidium D1 and D2 transitions at 795 nm and 780 nm respectively. These studies are relevant to the design and construction of a new generation of portable, rubidium, spin-exchange relaxation-free (SERF) magnetometers, capable of sensitivities of 1 fT Hz-1/2 1.

Explore related subjects

physics.atom-ph

Keep this discovery

BibTeXRIS

Alexander Pouliot, Hermina C. Beica, Adam Carew, Andrejs Vorozcovs, Gehrig Carlse, Brynle Barrett, Anantharaman Kumarakrishnan. 2018-05-18. Investigations of optical pumping for magnetometry using an auto-locking laser system. https://doi.org/10.1117/12.2304598

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Delay-engineered dynamical phases in a programmable non-Markovian spin oscillator

Non-Markovian dynamics offer a new route towards engineering non-equilibrium matter, where memory and feedback act as programmable resources for controlling order in time. Here we report the realization of a non-Markovian spin oscillator in a hot vapour $^{129}$Xe-Cs co-magnetometer with programmable feedback delay and gain. By tuning these parameters, we observe a hierarchy of dynamical phases, including time-crystalline response, nonlinear bifurcations, and frequency-comb formation. The measured spectra and phase boundaries are captured by linear stability analysis of delayed Bloch equations, revealing these phenomena as different manifestations of the same memory-induced instability structure. These results establish time-delayed feedback as a powerful strategy for controlling non-equilibrium phases, enabling quantum sensing, frequency referencing, and synchronization within a single spin-based platform.

physics.atom-ph↗
arXiv2026

Non-stick vacuum wall collisions with a laser-coolable molecule

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~\mu$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

physics.atom-ph↗
arXiv2026

Kinetic modeling of molecular beam formation in a cryogenic buffer-gas cell

Cryogenic buffer-gas cells are widely used to produce cold molecular beams, but the microscopic dynamics governing beam formation remain challenging to model. Here we present fully kinetic simulations of a cryogenic buffer-gas cell using the Direct Simulation Monte Carlo method implemented in the PICLas framework, treating the buffer gas and ablated molecules within a single unified model. We capture characteristic features of cryogenic buffer-gas sources, including plume cooling, directed transport toward the aperture, and the formation of a slow molecular beam, while also resolving energy transfer from the hot ablation plume to the helium buffer gas that is inaccessible to existing approaches relying on the background-gas approximation. Our results demonstrate that fully kinetic simulations can provide detailed insights into buffer-gas cell dynamics and open a route toward a systematic optimization of such sources.

physics.atom-ph↗