Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1806.10921

FTIR and GCMS analysis of epoxy resin decomposition products feeding the flame during UL 94 standard flammability test. Application to the understanding of the blowing-out effect in epoxy/polyhedral silsesquioxane formulations

Wenchao Zhang·Alberto Fina·Giuseppe Ferraro·Rongjie Yang
View original source ↗Read source document ↗Export metadata ↓

Abstract

A novel method was developed for the sampling of volatiles produces by polymer decomposition during UL94 standard flammability tests, allowing to collect, separate and analyze the precise composition of the fuel mixture feeding the flame in the real flammability tests. The system was validated on epoxy resin/polyhedral oligomeric silsesquioxanes and found extremely informative for the understanding of the flame retardancy mechanisms of POSS, previously referred to as the blowing-out effect. Collected products were analyzed by infrared spectroscopy and gas chromatography/mass spectroscopy, to identify the gaseous and liquid decomposition products, allowing to depict a comprehensive decomposition pathway for the epoxy resin. Lightweight volatiles, gaseous at room temperature, showed limited differences as a function of DOPO-POSS, whereas mixtures of liquid products evidenced for dramatic changes in the relative concentration as a function of DOPO-POSS. In pristine epoxy resin, the most abundant products were recognized as benzene, phenol, naphthalene and toluene, along with several tens of other aromatic products observed in lower amounts. The presence of DOPO-POSS at low concentration radically changes the composition of the aromatic volatiles mixture, as no significant amount of benzene is produced, while phenol becomes the main product, accounting for about half of the total, isopropyl phenol and bisphenol A, along with several tens of other products in lower concentrations. Such modification of the fuel mixture feeding the flame provided an explanation for the lower flammability of this formulation, as well as for the phenomenology of the blowing out effect.

Explore related subjects

physics.chem-ph

Keep this discovery

BibTeXRIS

Wenchao Zhang, Alberto Fina, Giuseppe Ferraro, Rongjie Yang. 2018-06-11. FTIR and GCMS analysis of epoxy resin decomposition products feeding the flame during UL 94 standard flammability test. Application to the understanding of the blowing-out effect in epoxy/polyhedral silsesquioxane formulations. https://arxiv.org/abs/1806.10921

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Breaking Water at Graphene Defects

Water dissociation at solid surfaces underpins processes ranging from corrosion and catalysis to electrochemistry and photovoltaics. Defects often serve as reactive sites for dissociation, yet how solvation influences water dissociation at such sites remains poorly understood. Here, we use state-of-the-art machine-learned interatomic potentials to explore water dissociation at defective graphene-water interfaces. We show that solvation qualitatively changes the reaction mechanism at a graphene single vacancy (SV), opening pathways that are absent for an isolated water molecule. Whereas the gas-phase process proceeds via a single concerted channel, the solvated SV splits water through two competing pathways: a basic route forming SV-H and OH-(aq), and an acidic route forming SV-OH and H3O+(aq). These lower-barrier pathways produce distinct chemisorbed intermediates that enhance graphene-water adsorption. Accordingly, even a simple carbon vacancy gives rise to unexpectedly rich interfacial chemistry, coupling surface chemistry to interfacial charge and wettability, with implications for carbon functionalization and nanofluidic transport.

physics.chem-ph↗
arXiv2026

Comprehensive Study of L-Menthol and Octanoic Acid as a Hydrophobic Eutectic Solvent

Hydrophobic eutectic solvents (HES) based on natural compounds represent promising green alternatives to conventional solvents. In this work, we investigate the physicochemical, structural, and dynamical properties of an ES formed by L-menthol and octanoic acid using a combined experimental and molecular dynamics simulation approach. Five compositions with molar ratios from 1:3 to 3:1 were studied with molecular dynamics simulation in the temperature range 15 degrees C to 35 degrees C. Experimental measurements of density and viscosity in the temperature range from 5 degrees C to 35 degrees C were complemented with results obtained from MD simulations employing the OPLS force field. Structural analyses based on radial distribution functions and Kirkwood-Buff integrals reveal that the dominant interactions in the mixture are hydrogen bonds between L-menthol and octanoic acid molecules. Dynamic properties, including self-diffusion coefficients and hydrogen-bond lifetimes, indicate that intermolecular hydrogen bonds between the two components are stronger and longer-lived than bonds between identical species. These findings provide molecular-level insight into the structure and transport properties of menthol-based ESs relevant for green solvent applications.

physics.chem-ph↗
arXiv2026

More is not always better: Dissociative photoionization limits the EUV absorbing photacid generator pentafluorophenyl triflate in photolithography

Pentafluorophenyl triflate has been explored as a highly absorbing neutral photoacid generator (PAG) candidate for next generation chemically amplified resists used in extreme ultraviolet (EUV) lithography. Although increased fluorination enhances EUV absorption, this study demonstrates that such an approach does not necessarily improve photoacid generation efficiency. Using photoelectron-photoion coincidence (PEPICO) spectroscopy at the 92 eV photon energy of the EUV scanners in combination with quantum chemical calculations, the dissociative photoionization of pentafluorophenyl triflate was systematically investigated. The photoionization mass spectrum reveals extensive fragmentation, with the parent ion contributing only 3.1 % of the total signal and CF$_3^+$ representing the dominant product ion. Computed appearance energies align well with experimental trends and support a sequential fragmentation pathway involving loss of SO$_2$, CF$_3$, and CO. Crucially, none of the major dissociation channels yield precursors capable of forming triflic acid, the strong photoacid required for efficient deprotection reactions in chemically amplified resists. Combined with previous dissociative electron attachment studies indicating similarly unfavorable fragmentation, the results demonstrate that despite its high EUV absorption cross section, pentafluorophenyl triflate is unsuitable as a PAG for EUV lithography. The findings highlight the importance of understanding fundamental photoionization and electron interaction mechanisms to guide the rational design of next generation high performance EUV photoresists.

physics.chem-ph↗