SearcharxivSearch

arXiv · 1807.10950

Dean flow and vortex shedding in a three-dimensional 180$^\circ$ sharp bend

Abstract

We present a detailed analysis of the flow in a 180 sharp bend of square cross-section. Besides numerous applications where this generic configuration is found, its main fundamental interest resides in the co-existence of a recirculation bubble in the outlet and a pair of Dean vortices driven from within the turning part of the bend, and how their interaction may drive the flow dynamics. A critical point analysis first shows that the complex flow topology that results from this particular configuration can be reduced to three pairs of critical points in the symmetry plane of the bend (with a focus and a half-saddle each). These pairs respectively generate the first recirculation bubble, the pair of Dean vortex tubes and a third pair of vortex tubes located in the upper corner of the bend, akin to the Dean vortices but of much lower intensity and impact on the rest of the flow. The Dean flow by contrast drives a strong vertical jet that splits the recirculation bubble into two symmetric lobes. Unsteadiness sets in at $Re\lesssim800$ through a supercritical bifurcation, as these lobes start oscillating antisymmetrically. These initially periodic oscillations grow in amplitude until the lobes break away from the main recirculation. The system then settles into a second periodic state where streamwise vortices driven by the Dean flow are alternatively formed and shed on the left and right part of the outlet. This novel mechanism of periodic vortex shedding results from the subtle interaction between the recirculation bubble in the outlet and the pair of Dean vortices generated in the turning part, and in this sense, they are expected to be a unique feature of the 180$^o$ bend with sufficiently close side walls.

Explore related subjects

Keep this discovery

BibTeXRIS

Alban Pothérat, Lintao Zhang. 2018-07-28. Dean flow and vortex shedding in a three-dimensional 180$^\circ$ sharp bend. https://arxiv.org/abs/1807.10950

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn