Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1808.00366

Pedestrian Motion Direction Estimation Using Simulated Automotive MIMO Radar

Petro Khomchuk·Inna Stainvas·Igal Bilik
View original source ↗Read source document ↗Export metadata ↓

Abstract

Micro-Doppler-based target classification capabilities of the automotive radars can provide high reliability and short latency to the future active safety automotive features. A large number of pedestrians surrounding vehicle in practical urban scenarios mandate prioritization of their treat level. Classification between relevant pedestrians that cross the street or are within the vehicle path and those that are on the sidewalks and move along the vehicle rout can significantly minimize a number of vehicle-to-pedestrian accidents. This work proposes a novel technique for a pedestrian direction of motion estimation which treats pedestrians as complex distributed targets and utilizes their micro-Doppler (MD) radar signatures. The MD signatures are shown to be indicative of pedestrian direction of motion, and the supervised regression is used to estimate the mapping between the directions of motion and the corresponding MD signatures. In order to achieve higher regression performance, the state of the art sparse dictionary learning based feature extraction algorithm was adopted from the field of computer vision by drawing a parallel between the Doppler effect and the video temporal gradient. The performance of the proposed approach is evaluated in a practical automotive scenario simulations, where a walking pedestrian is observed by a multiple-input-multiple-output (MIMO) automotive radar with a 2D rectangular array. The simulated data was generated using the statistical Boulic-Thalman human locomotion model. Accurate direction of motion estimation was achieved by using a support vector regression (SVR) and a multilayer perceptron (MLP) based regression algorithms. The results show that the direction estimation error is less than $10^{\circ}$ in $95\%$ of the tested cases, for pedestrian at the range of $100$m from the radar.

Explore related subjects

eess.SPcs.ITmath.IT

Keep this discovery

BibTeXRIS

Petro Khomchuk, Inna Stainvas, Igal Bilik. 2018-08-01. Pedestrian Motion Direction Estimation Using Simulated Automotive MIMO Radar. https://doi.org/10.1109/taes.2016.140682

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Load Balancing in Multi-Shell LEO Satellite Networks with Successive Interference Cancellation

Multi-shell low Earth orbit (LEO) networks can increase service opportunities, but altitude-dependent propagation can concentrate traffic on lower shells and create strong inter-shell interference under full frequency reuse. This paper develops a mathematical framework for load balancing in multi-shell LEO satellite networks. Satellites on each shell form an independent spherical Poisson point process (SPPP), and the typical user associates with one of the per-shell serving satellites through a shell-dependent biased received-power rule, with receiver-side successive interference cancellation (SIC) under full frequency reuse. Shell-wise association probabilities, conditioned serving-distance distributions, and the rate coverage probability under shell-dependent traffic loads are derived and validated by simulation. The results show that shell-dependent biasing alleviates lower-shell traffic concentration and improves rate coverage, while receiver-side SIC mitigates the dominant lower-shell interference experienced by users associated with upper shells. Load balancing provides its largest rate-coverage gain in traffic hotspots, while SIC becomes more valuable as receive-side isolation weakens. With a fixed satellite budget, distributing satellites across multiple shells can further improve hotspot rate coverage by adding shell-wise serving opportunities.

eess.SP↗
arXiv2026

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

eess.SP↗
arXiv2026

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

eess.SP↗