Comparison of observed ground-motion attenuation for the 2016/04/16 Mw7.8 Ecuador megathrust earthquake and its two largest aftershocks with existing ground-motion prediction equations

C. Beauval; J. Marinière; A. Laurendeau; J-C. Singaucho; C. Viracucha; M. Vallée; E. Maufroy; D. Mercerat; H. Yepes; M. Ruiz; A. Alvarado

doi:10.1785/0220160150

arXiv · 1812.09124

Comparison of observed ground-motion attenuation for the 2016/04/16 Mw7.8 Ecuador megathrust earthquake and its two largest aftershocks with existing ground-motion prediction equations

C. Beauval·J. Marinière·A. Laurendeau·J-C. Singaucho·C. Viracucha·M. Vallée·E. Maufroy·D. Mercerat·H. Yepes·M. Ruiz·A. Alvarado

View original source ↗Read source document ↗Export metadata ↓

Abstract

A megathrust subduction earthquake (Mw7.8) struck the coast of Ecuador on April 16th, 2016 at 23h58 UTC. This earthquake is one of the best-recorded megathrust events up to date. Besides the mainshock, two large aftershocks have been recorded on May 18th, 2016, at 7h57 (Mw 6.7) and 16h46 (Mw6.9). These data make a significant contribution for understanding the attenuation of ground motions in Ecuador. Peak ground accelerations and spectral accelerations are compared with four ground-motion prediction equations developed for interface earthquakes, the global Abrahamson et al. (2016) model, the Japanese equations Zhao et al. (2006) and Ghofrani and Atkinson (2014), and one Chilean equation Montalva et al. (2016). The four tested GMPEs are providing rather close predictions for the mainshock at distances up to 200km. However, our results show that high-frequency attenuation is greater for backarc sites, thus Zetal2016 and Metal2016, which are not taking into account this difference, are not considered further. Residual analyses show that G&A14 and Aetal2016 are well predicting the attenuation of ground motions for the mainshock. Comparisons of aftershock observations with Aetal2016 predictions indicate that the GMPE provide reasonable fit to the attenuation rates observed. The event terms of the Mw6.7 and Mw6.9 events are positive but within the expected scatter from worldwide similar earthquakes. The intra-event standard deviations are higher than the intraevent variability of the model, which is partly related to the poorly constrained VS30 proxys.

Explore related subjects

physics.geo-ph

Keep this discovery

BibTeX RIS

C. Beauval, J. Marinière, A. Laurendeau, J-C. Singaucho, C. Viracucha, M. Vallée, E. Maufroy, D. Mercerat, H. Yepes, M. Ruiz, A. Alvarado. 2018-12-21. Comparison of observed ground-motion attenuation for the 2016/04/16 Mw7.8 Ecuador megathrust earthquake and its two largest aftershocks with existing ground-motion prediction equations. https://doi.org/10.1785/0220160150

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Holistic law of aftershocks

The paper is devoted to the phenomenological theory of aftershocks occurring in the source of a tectonic earthquake following the main shock. The theory was developed by the author jointly with A.D. Zavyalov and O.D. Zotov during the course of a long-term study of aftershocks. The theory is based on the concepts of source deactivation and the source's proper time. The holistic law governing the decay of aftershock activity over proper time follows from the theory. The damping decrement is equal to the source deactivation coefficient. The main focus of this paper is the analysis of the logical structure of the theory. The paper also contains a brief description of the experimental results obtained using the theory. Keywords: earthquake source, aftershocks, Omori's law, Utsu's law, deactivation coefficient, proper time, underground clock, foreshock convergence, aftershock divergence.

physics.geo-ph↗

arXiv2026

Bayesian deep learning integration of geophysical and drilling data for 3D prediction of copper mineralization and drill targeting: a case study from the Kogodai prospect, Rudny Altai

Exploration drill targeting in structurally complex terranes is hindered by sparse sampling, heterogeneous datasets, and the ambiguity of geophysical inversions. Here, we present an uncertainty-aware 3D workflow for the acceleration of time-to-discovery in brownfield explorations and apply it to the Kogodai prospect in the Rudny Altai metallogenic province. We jointly analyse existing drilling and geophysical data in a comprehensive approach, revealing hidden patterns in already available data. Drillholes and trenches were desurveyed to a common 3D reference frame, and assays were composited to a consistent spatial support to facilitate joint modelling with geophysical inputs. We develop Bayesian deep-learning models to predict 3D fields of Cu grade together with chargeability and apparent resistivity while quantifying epistemic uncertainty via Monte Carlo sampling. The original contribution of this work is to treat the problem not as pointwise regression between co-located observations, but as joint learning of spatially continuous 3D fields from sparse, heterogeneous exploration evidence. The resulting 3D predictions delineate a principal mineralized trend and several localized candidate zones that coincide with elevated induced polarization (IP) responses, while uncertainty mapping highlights where predictions are robust versus where additional drilling would be most informative. The continuous Cu-grade field can also be thresholded to produce binary prospectivity maps, allowing the sensitivity of target delineation to the chosen cutoff to be evaluated. The outputs are intended for qualitative interpretation and risk-aware drill targeting rather than resource estimation, and we discuss key limitations arising from incomplete provenance metadata for geophysical products and heterogeneity of historical sampling.

physics.geo-ph↗

arXiv2026

PyelogP: Automated Energy-Based Determination of Preconsolidation Pressure in Clay Deposits

Estimating the preconsolidation pressure ($\sigma'_p$) from one-dimensional consolidation (oedometer) tests is critical in geotechnical engineering for settlement analysis. Traditional graphical methods, such as the Casagrande procedure, may introduce uncertainties, particularly when interpreting rounded $e$-log($P$) curves typical of disturbed specimens of soft clays and silt deposits. This paper introduces PyelogP, an open-source Python library designed to calculate $\sigma'_p$ using the strain-energy method proposed by Becker et al. (1987) as an automated and reproducible alternative. The algorithm combines natural cubic spline interpolation, knee-point detection via the Kneedle algorithm, and split-point linear regression within the work-pressure space. Physically informed thresholds, including overconsolidation ratio limits and second-derivative maxima (${d^2 e}/{d(\log \sigma')^2}$), are incorporated to establish pre-yield and post-yield fitting boundaries. The performance of PyelogP is evaluated against a suite of 22 experimental consolidation datasets covering various clay deposits, including Saint-Alban clay and San Francisco Old Bay Clay. The results demonstrate strong agreement with the published values ($R^2$ = 0.912, RMSE = 0.374, MBE = -0.080), while the $O(N^2)$ algorithm requires only a few milliseconds per curve for typical oedometer datasets and less than 150 milliseconds for the largest datasets.

physics.geo-ph↗