Thermal transport in silicene nanotubes: Effects of length, grain boundary and strain

Maryam Khalkhali; Farhad Khoeini; Ali Rajabpour

doi:10.1016/j.ijheatmasstransfer.2019.01.074

Home/Archive/arXiv

arXiv · 1901.00625

Thermal transport in silicene nanotubes: Effects of length, grain boundary and strain

Maryam Khalkhali·Farhad Khoeini·Ali Rajabpour

View original source ↗Read source document ↗Export metadata ↓

Abstract

Thermal transport behavior in silicene nanotubes has become more important due to the application of these promising nanostructures in the engineering of next-generation nanoelectronic devices. We apply non-equilibrium molecular dynamics (NEMD) simulations to study the thermal conductivity of silicene nanotubes with different lengths and diameters. We further explore the effects of grain boundary, strain, vacancy defect, and temperature in the range of 300-700 K on the thermal conductivity. Our results indicate that the thermal conductivity varies with the length approximately in the range of 24-34 W/m.K but exhibits insensitivity to the diameter and chirality. Besides, silicene nanotubes consisting of the grain boundary exhibit nearly 30% lower thermal conductivity compared with pristine ones. We discuss the underlying mechanism for the conductivity suppression of the system consisting of the grain boundary by calculating the phonon power spectral density. We find that by increasing the defect concentration and temperature, the thermal conductivity of the system decreases desirably. Moreover, for strained nanotubes, we observe unexpected changes in the thermal conductivity, so that the conductivity first increases significantly with tensile strain and then starts to decrease. The maximum thermal conductivity for the armchair and zigzag edge tubes appears at the strains about 3% and 5%, respectively, which is about 28% more than that of the unstrained structure.

Explore related subjects

physics.comp-ph cond-mat.mes-hall

Keep this discovery

BibTeX RIS

Maryam Khalkhali, Farhad Khoeini, Ali Rajabpour. 2019-01-03. Thermal transport in silicene nanotubes: Effects of length, grain boundary and strain. https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.074

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A Geometrically Parameterized Quasi-Stationary 3D Model for High-Frequency Induction Tube Welding

A three-dimensional multiphysics finite element framework for the simulation of high-frequency induction welding of tubes is presented. The model couples a time-harmonic magnetic scalar potential formulation with a stabilized quasi-stationary advection-diffusion heat transport equation, enabling accurate prediction of electromagnetic and thermal fields under industrial operating conditions. The framework incorporates parameterized geometry generation and semi-automated, physics-tailored mesh construction and is implemented using the open-source tools GetDP and Gmsh. Validation against measurements from a commercial induction welding line for AISI 304 stainless steel tubes demonstrates good agreement with operating data. The validated model is subsequently applied to investigate the influence of impeder material by comparing a conventional FeNiZnV ferrite with the soft magnetic composite Ferrotron 559H for the induction welding of AISI 304 stainless steel tubes.

physics.comp-ph↗

arXiv2026

Stress-Testing Dynamical and Generative Downscaling Using Subseasonal Extreme Precipitation Forecasts

Coarse spatial resolution limits the ability of subseasonal prediction models to resolve extreme precipitation. Downscaling with either dynamical or deep generative models can overcome this issue, but the comparative performance of these models for extremes across different atmospheric regimes remains poorly understood. In this work, we evaluate the Weather Research and Forecasting (WRF) model against a diffusion-based generative model by downscaling two physically distinct, extreme precipitation events up to lead times of 3 weeks. For a fair comparison with WRF, which can downscale boundary conditions from different driving models without model-specific training, the diffusion model is trained in an unpaired fashion. Both approaches improve upon the raw European Centre for Medium-Range Weather Forecasts forecasts, in comparison to fused rain gauge-radar observations in Switzerland (CombiPrecip), but exhibit regime-dependent strengths. WRF achieves the highest probabilistic skill for a multicell, non-stationary event. Conversely, the diffusion model is more consistent across different performance metrics for the two events, outperforming WRF in a more stationary supercell event. These results demonstrate that explicit dynamical modeling can add value for specific precipitation events for subseasonal lead times, and that generative downscaling adds value more broadly in different situations.

physics.comp-ph↗

arXiv2026

Nonlinear flame describing function and mean shift kinematics of slit flames under combined axial-transverse forcing

This study investigates the nonlinear kinematics of a premixed slit flame using a two-dimensional $G$-equation level-set framework. Results show that combined forcing induces nonlinear saturation in the FDF, characterized by early gain flattening and premature phase drops, which intensify with the transverse forcing amplitude. Kinematic analysis reveals that this geometric nonlinearity manifests as a reduction in the time-averaged flame height, defined as the mean shift. In the quasi-steady limit, this mean shift is analytically quantified via a multivariate asymptotic expansion, where fourth-order terms successfully capture the saturation mechanism at elevated amplitudes. By introducing a scaling parameter to account for transverse dominance, the frequency-dependent decay of the mean shift in the compact limit collapses onto a single master curve, enabling the derivation of a unified theoretical model that integrates this asymptotic response with a second-order low-pass filter. Furthermore, because the mean shift reduces the physical extent of the flame, it alters the wrinkle propagation time. Correcting the Strouhal number using the measured mean shift collapses the dispersed nonlinear FDF curves onto the linear theory prediction. The analysis is further extended to disturbances convected at a finite speed, for which the linear transfer function is derived analytically and the correction with the measured mean shift continues to collapse the nonlinear FDF. These findings establish that the nonlinear FDF behavior under multidimensional forcing is fundamentally governed by the kinematic mean shift, providing a theoretical baseline for decoupling geometric nonlinearities from other thermo-diffusive or hydrodynamic instabilities in turbulent flames.

physics.comp-ph↗