Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1902.00620

Influence of Magnetic Force on the Flow Stability in a Rectangular duct

Rahman Anisur·Wenqia Xu·Kunhang Li·Hua-Shu Dou·Boo Cheong Khoo·Jie Mao
View original source ↗Read source document ↗Export metadata ↓

Abstract

The stability of the flow under the magnetic force is one of the classical problems in fluid mechanics. In this paper, the flow in a rectangular duct with different Hartmann (Ha) number is simulated. The finite volume method and the SIMPLE algorithm are used to solve a system of equations and the energy gradient theory is then used to study the (associated) stability of magnetohydrodynamics (MHD). The flow stability of MHD flow for different Hartmann (Ha) number, from Ha=1 to 40, at the fixed Reynolds number, Re=190 are investigated. The simulation is validated firstly against the simulation in literature. The results show that, with the increasing Ha number, the centerline velocity of the rectangular duct with MHD flow decreases and the absolute value of the gradient of total mechanical energy along the streamwise direction increases. The maximum of K appears near the wall in both coordinate axis of the duct. According to the energy gradient theory, this position of the maximum of K would initiate flow instability (if any) than the other positions. The higher the Hartmann number is, the smaller the K value becomes, which means that the fluid becomes more stable in the presence of higher magnetic force. As the Hartmann number increases, the K value in the parallel layer decreases more significantly than in the Hartmann layer. The most dangerous position of instability tends to migrate towards wall of the duct as the Hartmann number increases. Thus, with the energy gradient theory, the stability or instability in the rectangular duct can be controlled by modulating the magnetic force.

Explore related subjects

physics.flu-dynastro-ph.GAphysics.geo-phphysics.plasm-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Rahman Anisur, Wenqia Xu, Kunhang Li, Hua-Shu Dou, Boo Cheong Khoo, Jie Mao. 2019-02-07. Influence of Magnetic Force on the Flow Stability in a Rectangular duct. https://arxiv.org/abs/1902.00620

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗