Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1906.10727

Titanium Contacts to MoS2 with Interfacial Oxide: Interface Chemistry and Thermal Transport

Keren M. Freedy·David H. Olson·Patrick E. Hopkins·Stephen J. McDonnell
View original source ↗Read source document ↗Export metadata ↓

Abstract

The deposition of a thin oxide layer at metal/semiconductor interfaces has been previously reported as a means of reducing contact resistance in 2D electronics. Using X-ray photoelectron spectroscopy with in-situ Ti deposition, we fabricate Au/Ti/TiOx/MoS2 samples as well as Au/Ti/MoS2 and Au/TiOx/MoS2 for comparison. Elemental titanium reacts strongly with MoS2 whereas no interface reactions are observed in the two types of samples containing TiOx/MoS2 interfaces. Using time domain thermoreflectance for the measurement of thermal boundary conductance, we find that samples contacted with Ti and a thin TiOx layer at the interface (less than or equal to 1.5 nm) exhibit the same behavior as samples contacted solely with pure Ti. The Au/TiOx/MoS2 samples exhibit approximately 20% lower thermal boundary conductance, despite having the same MoS2 interface chemistry as the samples with thin oxide at the Ti/MoS2 interface. We identify the mechanism for this phenomenon, attributing it to the different interfaces with the top Au contact. Our work demonstrates that the use of thin interfacial oxide layers to reduce electrical contact resistance does not compromise heat flow in 2D electronic devices. We note that the thicknesses of the Ti and TiOx layers must be considered for optimal thermal transport.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Keren M. Freedy, David H. Olson, Patrick E. Hopkins, Stephen J. McDonnell. 2019-06-25. Titanium Contacts to MoS2 with Interfacial Oxide: Interface Chemistry and Thermal Transport. https://doi.org/10.1103/physrevmaterials.3.104001

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗