SearcharxivSearch

arXiv · 1907.10716

Direct numerical simulation of turbulent channel flow over random rough surfaces

Abstract

Direct numerical simulation (DNS) of flow in a turbulent channel with a random rough wall is performed at $Re_{\tau}=400$ and $600$. The roughness geometry corresponds to the experiments of Flack and Schultz (personal communication). The rough surface is used on the bottom wall of the channel. DNS of a smooth channel flow and a rod-roughened channel flow are also performed at $Re_{\tau}=400$ for validation and comparison. The skin friction coefficient of the random-rough channel shows good agreement with the experimental results of Flack and Schultz. Due to the roughness, the slip velocity on the rough wall increases while the mean velocity decreases in the log-law region. The streamwise and spanwise velocity fluctuations are enhanced near the rough wall. The pressure fluctuations show a significant increase in the roughness layer and exhibit a good collapse with the smooth wall in the outer layer. The streamwise mean momentum balance shows that pressure and viscous stress gradients are induced in the roughness layer, and the gradients are amplified at higher $Re_{\tau}$. The statistics of wall-shear stress fluctuations in the peak (above the mean height location) and valley (below the mean height location) regions are examined. The results indicate that reverse flow mainly occurs in the valley regions of the random roughness, and is enhanced at higher $Re_{\tau}$, but is not as strong as the recirculation within the cavities in the rod-roughened channel. The probability distribution function of wall-shear stress shows a better collapse after subtracting the mean and normalizing by the root-mean-squared value. The distribution tail is widened by the random roughness, implying that the probability of extreme events is increased. The probability of extreme events in the random-rough channel increases with increasing $Re_{\tau}$, in accordance with previous studies on smooth-wall flows.

Explore related subjects

Keep this discovery

BibTeXRIS

R. Ma, K. Alamé, K. Mahesh. 2019-07-24. Direct numerical simulation of turbulent channel flow over random rough surfaces. https://arxiv.org/abs/1907.10716

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn