Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1910.08766

Noise level forecasts at 8-20MHz and their use for morphological studies of ionospheric absorption variations at EKB ISTP SB RAS radar

Oleg I. Berngardt
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this paper, a method is described for using 8-20MHz noise absorption effect for realtime detecting radiowave absorption periods. The method is based on two empirical autoregression models of noise dynamics. The first (rough) prediction model is based on radar measurements of daily minimal noise dynamics averaged over 28-days with specially calculated weight coefficients. The second (fine) prediction model uses real-time scaling of rough model. The scaling is based on the comparison of this model with the experimental noise observations during previous 5 days. The models are based on the whole EKB ISTP SB RAS radar dataset (2013-2018). The rough model allows one to estimate the boundary beyond which the noise variations can be associated with absorption periods with a high degree of certainty. A joint analysis of simultaneous data on neighboring radar beams and at several frequencies reduces the detection errors, and allows to identify absorption events with a higher degree of confidence. Use of fine model allows to estimate absorption. The technique is validated by frequency dependence of absorption during two-frequency measurements. The found frequency dependence has an average exponent of the order of -1.5, which is in good agreement with the literature data and the data obtained earlier in analysis of solar X-ray flares. The use of the detection technique at EKB radar shows that most probable absorption over absorption events is about -0.65dB. Analysis of absorption of different amplitudes shows that low-intensity absorption events (0..-1.3dB) have slight local time dependence and mostly observed at north directions. For the storng absorption events (stronger than -1.3dB) the local time dynamics correlates well with noise level dynamics, and usually fills the whole radar field-of-view.

Explore related subjects

physics.geo-phphysics.ao-phphysics.space-ph

Keep this discovery

BibTeXRIS

Oleg I. Berngardt. 2019-10-19. Noise level forecasts at 8-20MHz and their use for morphological studies of ionospheric absorption variations at EKB ISTP SB RAS radar. https://doi.org/10.1016/j.asr.2020.04.005

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Holistic law of aftershocks

The paper is devoted to the phenomenological theory of aftershocks occurring in the source of a tectonic earthquake following the main shock. The theory was developed by the author jointly with A.D. Zavyalov and O.D. Zotov during the course of a long-term study of aftershocks. The theory is based on the concepts of source deactivation and the source's proper time. The holistic law governing the decay of aftershock activity over proper time follows from the theory. The damping decrement is equal to the source deactivation coefficient. The main focus of this paper is the analysis of the logical structure of the theory. The paper also contains a brief description of the experimental results obtained using the theory. Keywords: earthquake source, aftershocks, Omori's law, Utsu's law, deactivation coefficient, proper time, underground clock, foreshock convergence, aftershock divergence.

physics.geo-ph↗
arXiv2026

Bayesian deep learning integration of geophysical and drilling data for 3D prediction of copper mineralization and drill targeting: a case study from the Kogodai prospect, Rudny Altai

Exploration drill targeting in structurally complex terranes is hindered by sparse sampling, heterogeneous datasets, and the ambiguity of geophysical inversions. Here, we present an uncertainty-aware 3D workflow for the acceleration of time-to-discovery in brownfield explorations and apply it to the Kogodai prospect in the Rudny Altai metallogenic province. We jointly analyse existing drilling and geophysical data in a comprehensive approach, revealing hidden patterns in already available data. Drillholes and trenches were desurveyed to a common 3D reference frame, and assays were composited to a consistent spatial support to facilitate joint modelling with geophysical inputs. We develop Bayesian deep-learning models to predict 3D fields of Cu grade together with chargeability and apparent resistivity while quantifying epistemic uncertainty via Monte Carlo sampling. The original contribution of this work is to treat the problem not as pointwise regression between co-located observations, but as joint learning of spatially continuous 3D fields from sparse, heterogeneous exploration evidence. The resulting 3D predictions delineate a principal mineralized trend and several localized candidate zones that coincide with elevated induced polarization (IP) responses, while uncertainty mapping highlights where predictions are robust versus where additional drilling would be most informative. The continuous Cu-grade field can also be thresholded to produce binary prospectivity maps, allowing the sensitivity of target delineation to the chosen cutoff to be evaluated. The outputs are intended for qualitative interpretation and risk-aware drill targeting rather than resource estimation, and we discuss key limitations arising from incomplete provenance metadata for geophysical products and heterogeneity of historical sampling.

physics.geo-ph↗
arXiv2026

PyelogP: Automated Energy-Based Determination of Preconsolidation Pressure in Clay Deposits

Estimating the preconsolidation pressure ($\sigma'_p$) from one-dimensional consolidation (oedometer) tests is critical in geotechnical engineering for settlement analysis. Traditional graphical methods, such as the Casagrande procedure, may introduce uncertainties, particularly when interpreting rounded $e$-log($P$) curves typical of disturbed specimens of soft clays and silt deposits. This paper introduces PyelogP, an open-source Python library designed to calculate $\sigma'_p$ using the strain-energy method proposed by Becker et al. (1987) as an automated and reproducible alternative. The algorithm combines natural cubic spline interpolation, knee-point detection via the Kneedle algorithm, and split-point linear regression within the work-pressure space. Physically informed thresholds, including overconsolidation ratio limits and second-derivative maxima (${d^2 e}/{d(\log \sigma')^2}$), are incorporated to establish pre-yield and post-yield fitting boundaries. The performance of PyelogP is evaluated against a suite of 22 experimental consolidation datasets covering various clay deposits, including Saint-Alban clay and San Francisco Old Bay Clay. The results demonstrate strong agreement with the published values ($R^2$ = 0.912, RMSE = 0.374, MBE = -0.080), while the $O(N^2)$ algorithm requires only a few milliseconds per curve for typical oedometer datasets and less than 150 milliseconds for the largest datasets.

physics.geo-ph↗