Dynamic Control of a Fiber Manufacturing Process using Deep Reinforcement Learning

Abstract

This paper presents a model-free deep reinforcement learning (DRL) approach for controlling a fiber drawing system. The custom DRL-based control system predictively regulates fiber diameter and produces a fiber with a desired, constant or non-constant, diameter trajectory, i.e. diameter variation along the fiber length. Physical models of the system are not used. The system was trained and tested on a compact fiber drawing system, which has non-linear delayed dynamics and stochastic behaviors. For a reference trajectory with random step changes, after 1 hour of training, the DRL controller showed the same root mean squared error (RMSE) as an optimized PI controller; after 3 hours of training, it achieved the performance of a quadratic dynamic matrix controller (QDMC). While the PI feedback controller showed 3.5 seconds of time lag in a step response, the DRL controller showed less than a second of time lag. Controller performance tests on trajectories not used in the training process are conducted; for a sine sweep reference trajectory, the DRL controller maintained an RMSE under 40 um up to a frequency of 45 mHz, compared to 25 mHz for QDMC.