Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1912.07437

A quantized statistical model of flow stress and generalized Hall-Petch law for deformable polycrystalline materials. A temperature-dimension effect

Alexander A. Reshetnyak
View original source ↗Read source document ↗Export metadata ↓

Abstract

A theory of flow stress (FS), reviewing and developing our research,e.g. arxiv:1803.08247;1908.09338, is proposed,including yield strength (YS) of PC materials for quasi-static plastic loading for grain of average size d in range 10^{-8}-10^{-2}m. It's based on statistical model of energy spectrum distribution in each grain of 1-mode PC sample under plastic loading,with highest level equal to maximal dislocation energy. Found distribution of scalar dislocation density leads to FS due to Taylor strain hardening containing usual and anomalous HP laws for coarse and NC grains, respectively, and reaches maximum for extreme grain size d_0 of order 10^{-8}m. Maximum undergoes shift to region of larger grains for decreasing T and increasing strains. Coincidence is established among theoretical and experimental data on YS for BCC(\alpha-Fe), FCC(Cu,Al,Ni),HCP(\alpha-Ti,Zr) PC materials at T=300K.The T-dependence of strength quantities is studied. It is shown using Al that YS grows with decrease in T for all grains with d>3d_0,and then YS decreases in NC region,thus determining a temperature-dimension effect (TDE).1-phase model of PC sample is extended by including softening GB phase into 2-phase model,and then by dispersion (un)hardening. A quasi-particle interpretation of crystallite energy quantization is suggested.Analytic and graphic forms of HP laws are obtained in above samples with different values of small-,large-angle GB and constant pores.The maximum of YS and respective extremal grain size of the samples are shifted by change of 2-nd phase.The T-dependence of YS in range of 150-350K for Al demonstrates the validity of TDE. An enlargement of 2-nd phase neutralizes TDE.Deformation curves for 1- and 2-mode 2-phase \alpha-Fe PC model are constructed with Backofen-Considere fracture criterion,as compared to experimental,1-phase model data, and strongly depend on multimodality and GB

Explore related subjects

cond-mat.mtrl-scicond-mat.mes-hallcond-mat.softcond-mat.stat-mech

Keep this discovery

BibTeXRIS

Alexander A. Reshetnyak. 2019-12-16. A quantized statistical model of flow stress and generalized Hall-Petch law for deformable polycrystalline materials. A temperature-dimension effect. https://arxiv.org/abs/1912.07437

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗