Aligning free surface properties in time-varying hydraulic jumps

Rui Li; Kristen D. Splinter; Stefan Felder

Home/Archive/arXiv

arXiv · 2007.05128

Aligning free surface properties in time-varying hydraulic jumps

Rui Li·Kristen D. Splinter·Stefan Felder

View original source ↗Read source document ↗Export metadata ↓

Abstract

Hydraulic jumps occur commonly in natural channels and energy dissipation systems of hydraulic structures in the violent transition from supercritical to subcritical flows. They are characterised by large flow aeration, high turbulence and strong fluctuations of the free surface and the jump toe. For free surface measurements, fast-sampling, fixed-point instruments such as acoustic displacement meters (ADMs) and wire gauges (WGs) are commonly used, while LIDAR technology is a relatively new method for recording instantaneous free surface motions of aerated flows. While each of these instruments has been shown previously to provide reasonable results for basic and advanced free surface properties, differences between instruments and experiments remain unexplained. To systematically analyse these differences, simultaneous laboratory experiments of aerated hydraulic jumps were conducted. Good agreement between the three instruments was obtained for basic free surface properties including elevations, fluctuations, skewness, kurtosis, and frequencies, as well as advanced free surface properties such as integral time and length scales. These new results indicate that any of these instruments can be used for the recording of free surface properties albeit the integration limit for free surface scales must be considered. A key finding of this research was that differences between repeated experiments as well as previous studies were observed when using the visual jump toe for alignment. However, this bias could be resolved by using the mean jump toe location recorded with the LIDAR. Therefore, future studies should simultaneously measure the instantaneous jump toe to provide more consistent results across studies.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Rui Li, Kristen D. Splinter, Stefan Felder. 2020-07-10. Aligning free surface properties in time-varying hydraulic jumps. https://arxiv.org/abs/2007.05128

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗