Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2101.03188

Breath Figure Spot: a Recovery Concentration manifestation

Ali Alshehri·H. Pirouz Kavehpour
View original source ↗Read source document ↗Export metadata ↓

Abstract

Directing a jet of humid air to impinge on a surface that is cooled below the dew point results in micro-sized water droplets. Lord Rayleigh discussed the phenomenon called such behavior Breath Figures (BF). Historically, utilizing dew as a water source was investigated by several scientists dating back to Aristotle. However, due to the degrading effects of air as a non-condensable gas (NCG) such efforts are limited to small scale water production systems. Recently, the concept of BF has been utilized extensively in the generation of micro-scale polymer patterns as a self-assembly process. However, the generation of BF on surfaces while being impinged by a humid air jet has not been quantified. In this work, we illustrate that a BF spot generated on a cooled surface is a manifestation of a recovery concentration. The concept is analogous to the concept of adiabatic-wall temperature defined for heat transfer applications. Upon closer examination of the vapor concentration distribution on a cooled impinged surface, we found that the distribution exhibits distinct regimes depending on the radial location from the center of the impingement region. The first regime is confined within the impingement region, whereas the second regime lies beyond this radial location including the wall jet region. Scaling analysis as well as numerical solution of the former regime shows that the maximum concentration on the surface is equivalent to its counterpart of a free unbounded jet with similar geometrical conditions. Additionally, the scaling analysis of the latter regime reveals that the jet speed and standoff distance are not important in determining the recovery concentration. However, the recovery concentration is found to vary monotonically with the radial location. Our conclusions are of great importance in optimizing jet impingement where condensation phase change is prevalent.

Explore related subjects

physics.flu-dynphysics.class-ph

Keep this discovery

BibTeXRIS

Ali Alshehri, H. Pirouz Kavehpour. 2021-01-08. Breath Figure Spot: a Recovery Concentration manifestation. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121166

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗