Heat transfer augmentation by recombination reactions in turbulent reacting boundary layers at elevated pressures

Nikolaos Perakis; Oskar Haidn; Matthias Ihme

Home/Archive/arXiv

arXiv · 2102.06821

Heat transfer augmentation by recombination reactions in turbulent reacting boundary layers at elevated pressures

Nikolaos Perakis·Oskar Haidn·Matthias Ihme

View original source ↗Read source document ↗Export metadata ↓

Abstract

A study of a reacting boundary layer flow with heat transfer at conditions typical for configurations at elevated pressures has been performed using a set of direct numerical simulations. Effects of wall temperatures are investigated, representative for cooled walls of gas turbines and sub-scale rocket engines operating with hydrocarbon as fuels. The results show that exothermic chemical reactions induced by the low-enthalpy in the boundary layer take place predominantly in the logarthimic sub-layer. The majority of the heat release is attributed to the exothermic recombination of OH and CO to produce CO2 and H2O. The recombination reactions result in an increase of the wall heat loads by up to 20% compared to the inert flow. The gas composition experiences strong deviations from the chemical equilibrium conditions. In fact, a quenching of the major species is observed within the viscous sub-layer and the transition region. Analysis of chemical time-scales shows that the location of quenched composition coincides with the region where the Damkoehler number decreases below unity. Within the viscous sub-layer, a secondary reaction zone is detected, involving the production of formyl and formaldehyde radicals that provide an additional source of energy release. The analysis of the reaction paths showed that reactions with zero activation energy are responsible for this change in gas composition, which also account for the initial branching of hydrocarbon fuels decomposition according to previous auto-ignition studies. The effect of the secondary recombination reactions is more prominent for the lower wall temperature case. Finally, the role of turbulent fluctuations on the species net chemical production rates is evaluated, showing a strong correlation between species and temperature fluctuations.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Nikolaos Perakis, Oskar Haidn, Matthias Ihme. 2021-02-12. Heat transfer augmentation by recombination reactions in turbulent reacting boundary layers at elevated pressures. https://arxiv.org/abs/2102.06821

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗