Imaging properties of large field-of-view quadratic metalenses and their applications to fingerprint detection

Emmanuel Lassalle; Tobias W. W. Mass; Damien Eschimese; Anton V. Baranikov; Egor Khaidarov; Shiqiang Li; Ramon Paniagua-Dominguez; Arseniy I. Kuznetsov

arXiv · 2102.07999

Imaging properties of large field-of-view quadratic metalenses and their applications to fingerprint detection

Emmanuel Lassalle·Tobias W. W. Mass·Damien Eschimese·Anton V. Baranikov·Egor Khaidarov·Shiqiang Li·Ramon Paniagua-Dominguez·Arseniy I. Kuznetsov

View original source ↗Read source document ↗Export metadata ↓

Abstract

Dielectric metasurfaces, extremely thin nanostructured dielectric surfaces, hold promise to replace conventional refractive optics, such as lenses, due to their high performance and compactness. However, designing large field-of-view (FOV) metalenses, which are of particular importance when imaging relatively big objects at short distances, remains one of the most critical challenges. Recently, metalenses implementing a quadratic phase profile have been put forward to solve this problem with a single element, but despite their theoretical ability to provide $180^\circ\,$FOV, imaging over very large FOV has not been demonstrated yet. In this work, we provide an in-depth analysis of the imaging properties of quadratic metalenses and, in particular, show that due to their intrinsic barrel distortion or fish-eye effect, there is a fundamental trade-off between the FOV achievable in a given imaging configuration and the optical resolution of the metalens and/or the detector resolution. To illustrate how to harness the full potential of quadratic metalenses, we apply these considerations to the fingerprint detection problem, and demonstrate experimentally the full imaging of a $5\,$mm fingerprint with features of the order of $100\,\mu$m, with a metalens ten times smaller in size and located at a distance of only $2.5\,$mm away from the object. This constitutes the most compact system reported so far for the fingerprint detection.

Explore related subjects

physics.optics

Keep this discovery

BibTeX RIS

Emmanuel Lassalle, Tobias W. W. Mass, Damien Eschimese, Anton V. Baranikov, Egor Khaidarov, Shiqiang Li, Ramon Paniagua-Dominguez, Arseniy I. Kuznetsov. 2021-02-16. Imaging properties of large field-of-view quadratic metalenses and their applications to fingerprint detection. https://arxiv.org/abs/2102.07999

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗

arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗