SearcharxivSearch

arXiv · 2102.08266

Theoretical analysis on the transient ignition of premixed expanding flame in a quiescent mixture

Abstract

The present theory considers the transient evolution of the temperature and fuel mass fraction distributions, and it can determine the critical heating power and minimum ignition energy for successful ignition. The flame initiation process subject to central heating can be approximately decomposed into four stages, i.e., the fast establishment of the ignition kernel, the ignition-energy-supported flame kernel propagation, unsteady transition of the flame kernel, and quasi-steady spherical flame propagation. Comparison between present transient theory and previous quasi-steady theory indicates that the unsteady effects directly lead to the appearance of flame kernel establishing stage and considerably affect the subsequent flame kernel development by lowering the flame propagation speed. Time scale analysis is conducted, and it is found that the transient formulation completely degenerates to the quasi-steady theory either in the neighborhood of stationary flame ball or as approaching the planar flame. Previous quasi-steady theory shows that the critical heating power for successful ignition is proportional to the cube of the critical flame radius. However, the critical heating power predicted by the present transient formulation deviates this scaling law, which can be attributed to the unsteady thermal conduction from heating center to the flame front. Furthermore, in the transient formulation the central heating with finite duration is considered and the minimum ignition energy is obtained. For the first time, the memory effect that persistently drives flame propagation subsequent to central heating switching-off is examined. It is found that as the heating power grows, the memory effect becomes increasingly important and it can greatly reduce the minimum ignition energy.

Explore related subjects

Keep this discovery

BibTeXRIS

Dehai Yu, Zheng Chen. 2021-02-16. Theoretical analysis on the transient ignition of premixed expanding flame in a quiescent mixture. https://doi.org/10.1017/jfm.2021.633

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn