Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2102.11060

Effect of Precursors and Radiation on Soot Formation in Turbulent Diffusion Flame

Manedhar Reddy B·Ashoke De·Rakesh Yadav
View original source ↗Read source document ↗Export metadata ↓

Abstract

Soot formation in Delft flame III, a pilot stabilized turbulent diffusion flame burning natural gas/air, is investigated using ANSYS FLUENT by considering two different approaches for soot inception. In the first approach soot inception is based on the formation rate of acetylene, while the second approach considers the formation rate of two and three-ringed aromatics to describe the soot inception [1]. Transport equations are solved for soot mass fraction and radical nuclei concentration to describe inception, coagulation, surface growth, and oxidation processes. The turbulent-chemistry interactions and soot precursors are described by the steady laminar flamelet model (SLFM). Two chemical mechanisms GRI 3.0 [2] and POLIMI [3] are used to represent the effect of species concentration on soot formation. The radiative properties of the medium are included based on the non-gray modeling approach by considering four factious gases; the weighted sum of gray gas (WSGGM) approach is used to model the absorption coefficient. The effect of soot on radiative transfer is modeled in terms of effective absorption coefficient of the medium. A beta probability density function (\b{eta}-PDF) in terms of normalized temperature is used to describe the effect of turbulence on soot formation. The results clearly elucidate the strong effect of radiation and species concentration on soot volume fraction predictions. Due to increase in radiative heat loss with soot, flame temperature decreases slightly. The inclusion of ethylene has less synergic effect than that of both benzene and ethylene. Both cases have less impact on the nucleation of soot. The increase in soot volume fraction with soot-turbulence interaction is in consistence with the DNS predictions.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Manedhar Reddy B, Ashoke De, Rakesh Yadav. 2021-02-22. Effect of Precursors and Radiation on Soot Formation in Turbulent Diffusion Flame. https://doi.org/10.1016/j.fuel.2015.01.080

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗