SearcharxivSearch

arXiv · 2103.12727

Data-Driven Closure of Projection-Based Reduced Order Models for Unsteady Compressible Flows

Abstract

A data-driven closure modeling based on proper orthogonal decomposition (POD) temporal modes is used to obtain stable and accurate reduced order models (ROMs) of unsteady compressible flows. Model reduction is obtained via Galerkin and Petrov-Galerkin projection of the non-conservative compressible Navier-Stokes equations. The latter approach is implemented using the least-squares Petrov-Galerkin (LSPG) technique and the present methodology allows pre-computation of both Galerkin and LSPG coefficients. Closure is performed by adding linear and non-linear coefficients to the original ROMs and minimizing the error with respect to the POD temporal modes. In order to further reduce the computational cost of the ROMs, an accelerated greedy missing point estimation (MPE) hyper-reduction method is employed. A canonical compressible cylinder flow is first analyzed and serves as a benchmark. The second problem studied consists of the turbulent flow over a plunging airfoil undergoing deep dynamic stall. For the first case, linear and non-linear closure coefficients are both low in intrusiveness, capable of providing results in excellent agreement with the full order model. Regularization of calibrated models is also straightforward for this case. On the other hand, the dynamic stall flow is significantly more challenging, specially when only linear coefficients are used. Results show that non-linear calibration coefficients outperform their linear counterparts when a POD basis with fewer modes is used in the reconstruction. However, determining a correct level of regularization is more complicated with non-linear coefficients. Hyper-reduced models show good results when combined with non-linear calibration and an appropriate sized POD basis.

Explore related subjects

Keep this discovery

BibTeXRIS

Victor Zucatti, William Wolf. 2021-03-23. Data-Driven Closure of Projection-Based Reduced Order Models for Unsteady Compressible Flows. https://doi.org/10.1016/j.cma.2021.114120

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn