Large Scale GPU Based Simulations of Turbulent Bubbly Flow in a Square Duct

Purushotam Kumar; Surya Pratap Vanka

Home/Archive/arXiv

arXiv · 2104.01636

Large Scale GPU Based Simulations of Turbulent Bubbly Flow in a Square Duct

Purushotam Kumar·Surya Pratap Vanka

View original source ↗Read source document ↗Export metadata ↓

Abstract

In this paper, we present the results of a numerical study of air-water turbulent bubbly flow in a periodic vertical square duct. The study is conducted using a novel numerical technique which leverages Volume of Fluid method for interface capturing and Sharp Surface Force method for accurate representation of the surface tension forces. A three-dimensional geometry construction method is employed during solution of interface equation which gives absolute conservation of mass and sharp interface between gas and liquid phases. The entire algorithm has been implemented on a data parallel mode on multiple graphics processing units (GPU) taking advantage of the large number of available cores. We have studied the dynamics of a swarm of spherical bubbles co-flowing with the upward turbulent flow and compared results with an unladen turbulent flow. The frictional Reynolds number of the unladen $Re_{\tau}$ is 360, which is sufficient to sustain a turbulent flow. We observe the turbulence-driven secondary flows in the mean flow, with complex instantaneous turbulent vortical structures. The interaction of these secondary flows with the upwards rising bubbles is very complex and leads to significant changes in the instantaneous and time-averaged flow field. We present the results of mean void fraction distribution, mean velocities, longitudinal and transverse turbulence intensities along the wall, corner bisector, and wall bisector. A peak in the void fraction distribution near the walls is observed representing the migration of bubbles to a preferred section of the duct. The effects of turbulence-driven secondary flows and instantaneous large eddies on preferential concentration of the bubbles are discussed. The dispersed bubbles are seen to break the long elongated turbulent structures commonly observed in the unladen turbulent flow.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Purushotam Kumar, Surya Pratap Vanka. 2021-04-04. Large Scale GPU Based Simulations of Turbulent Bubbly Flow in a Square Duct. https://arxiv.org/abs/2104.01636

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗