Valorization of incinerator bottom ash for the production of resource-efficient eco-friendly concrete: Performance and toxicological characterization

Ramesh B. M.; Rahul Murali Vongole; Yashas Nagraj; Sujay Raghavendra Naganna; Sreedhara B. M.; Gireesh Mailar; Ramesh P. S.; Zaher Mundher Yaseen

doi:10.1007/s44150-021-00006-9

arXiv · 2104.12497

Valorization of incinerator bottom ash for the production of resource-efficient eco-friendly concrete: Performance and toxicological characterization

Ramesh B. M.·Rahul Murali Vongole·Yashas Nagraj·Sujay Raghavendra Naganna·Sreedhara B. M.·Gireesh Mailar·Ramesh P. S.·Zaher Mundher Yaseen

View original source ↗Read source document ↗Export metadata ↓

Abstract

The disposal of incinerator bottom ash usually produced by the incineration of inorganic constituents of the municipal solid wastes (MSW) in an eco-friendly way is one of the issues of concern, globally. By the way, the present study is related to the utilization of MSW incinerator bottom ash and recycled demolition waste aggregate as partial replacement materials for fine and coarse aggregate, respectively to produce eco-friendly concrete. This study adopted an innovative pretreatment technique for stabilizing the MSW incinerator bottom ash. Five distinct M20 grade concrete mixes were produced with different proportions of fine aggregate, MSW incinerator bottom ash, coarse aggregate, and recycled demolition waste aggregate along with cement and water. The incinerator bottom ash was replaced at 5% and 10% quantities with fine aggregate and the recycled demolition waste aggregate was replaced at 40% and 60% of the weight of the coarse aggregate. The strength and durability properties of the M20 grade concrete were analyzed. It was noticed that the strength and durability properties of the eco-friendly concrete specimens produced by incorporating 5% - incinerator bottom ash and 40% - recycled demolition waste aggregate were superior to that of the control mix concrete. Laboratory tank leaching tests showed that the eco-friendly concrete do not pose any significant environmental hazard. Furthermore, the microstructural analysis through scanning electron microscope (SEM) images, revealed dense aggregate paste matrix interfaces with less micro-pores and insignificant micro-cracks due to the incorporation of incinerator bottom ash as a partial replacement to the fine aggregate.

Explore related subjects

physics.chem-ph physics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Ramesh B. M., Rahul Murali Vongole, Yashas Nagraj, Sujay Raghavendra Naganna, Sreedhara B. M., Gireesh Mailar, Ramesh P. S., Zaher Mundher Yaseen. 2021-04-26. Valorization of incinerator bottom ash for the production of resource-efficient eco-friendly concrete: Performance and toxicological characterization. https://doi.org/10.1007/s44150-021-00006-9

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Breaking Water at Graphene Defects

Water dissociation at solid surfaces underpins processes ranging from corrosion and catalysis to electrochemistry and photovoltaics. Defects often serve as reactive sites for dissociation, yet how solvation influences water dissociation at such sites remains poorly understood. Here, we use state-of-the-art machine-learned interatomic potentials to explore water dissociation at defective graphene-water interfaces. We show that solvation qualitatively changes the reaction mechanism at a graphene single vacancy (SV), opening pathways that are absent for an isolated water molecule. Whereas the gas-phase process proceeds via a single concerted channel, the solvated SV splits water through two competing pathways: a basic route forming SV-H and OH-(aq), and an acidic route forming SV-OH and H3O+(aq). These lower-barrier pathways produce distinct chemisorbed intermediates that enhance graphene-water adsorption. Accordingly, even a simple carbon vacancy gives rise to unexpectedly rich interfacial chemistry, coupling surface chemistry to interfacial charge and wettability, with implications for carbon functionalization and nanofluidic transport.

physics.chem-ph↗

arXiv2026

Comprehensive Study of L-Menthol and Octanoic Acid as a Hydrophobic Eutectic Solvent

Hydrophobic eutectic solvents (HES) based on natural compounds represent promising green alternatives to conventional solvents. In this work, we investigate the physicochemical, structural, and dynamical properties of an ES formed by L-menthol and octanoic acid using a combined experimental and molecular dynamics simulation approach. Five compositions with molar ratios from 1:3 to 3:1 were studied with molecular dynamics simulation in the temperature range 15 degrees C to 35 degrees C. Experimental measurements of density and viscosity in the temperature range from 5 degrees C to 35 degrees C were complemented with results obtained from MD simulations employing the OPLS force field. Structural analyses based on radial distribution functions and Kirkwood-Buff integrals reveal that the dominant interactions in the mixture are hydrogen bonds between L-menthol and octanoic acid molecules. Dynamic properties, including self-diffusion coefficients and hydrogen-bond lifetimes, indicate that intermolecular hydrogen bonds between the two components are stronger and longer-lived than bonds between identical species. These findings provide molecular-level insight into the structure and transport properties of menthol-based ESs relevant for green solvent applications.

physics.chem-ph↗

arXiv2026

More is not always better: Dissociative photoionization limits the EUV absorbing photacid generator pentafluorophenyl triflate in photolithography

Pentafluorophenyl triflate has been explored as a highly absorbing neutral photoacid generator (PAG) candidate for next generation chemically amplified resists used in extreme ultraviolet (EUV) lithography. Although increased fluorination enhances EUV absorption, this study demonstrates that such an approach does not necessarily improve photoacid generation efficiency. Using photoelectron-photoion coincidence (PEPICO) spectroscopy at the 92 eV photon energy of the EUV scanners in combination with quantum chemical calculations, the dissociative photoionization of pentafluorophenyl triflate was systematically investigated. The photoionization mass spectrum reveals extensive fragmentation, with the parent ion contributing only 3.1 % of the total signal and CF$_3^+$ representing the dominant product ion. Computed appearance energies align well with experimental trends and support a sequential fragmentation pathway involving loss of SO$_2$, CF$_3$, and CO. Crucially, none of the major dissociation channels yield precursors capable of forming triflic acid, the strong photoacid required for efficient deprotection reactions in chemically amplified resists. Combined with previous dissociative electron attachment studies indicating similarly unfavorable fragmentation, the results demonstrate that despite its high EUV absorption cross section, pentafluorophenyl triflate is unsuitable as a PAG for EUV lithography. The findings highlight the importance of understanding fundamental photoionization and electron interaction mechanisms to guide the rational design of next generation high performance EUV photoresists.

physics.chem-ph↗