Experimental Investigation of the Fluid-Structure Interaction during the Water Impact of Thin Aluminium Plates at High Horizontal Speed

Emanuele Spinosa; Alessandro Iafrati

doi:10.1016/j.ijimpeng.2020.103673

Home/Archive/arXiv

arXiv · 2105.06180

Experimental Investigation of the Fluid-Structure Interaction during the Water Impact of Thin Aluminium Plates at High Horizontal Speed

Emanuele Spinosa·Alessandro Iafrati

View original source ↗Read source document ↗Export metadata ↓

Abstract

The water impact of an inclined flat plate and at high horizontal velocity is experimentally investigated with focus on the fluid-structure interaction aspects. Several test conditions have been examined by varying the vertical to horizontal velocity ratio, the pitch angle and the plate thickness. Measurements are performed in terms of strains, loads and local pressure. The study highlights the significant changes in the strains and, more in general, in the structural behaviour when varying the plate stiffness and the test conditions. For some of the test presented, permanent deformations are also found. The strong fluid-structure interaction is analysed by comparing the simultaneous measurements of strains and pressures, and it is shown that the deformation of the plate leads to a reduction of the pressure peak and to a corresponding pressure rise behind it. The variation in the shape of the spray root caused by the structural deformation are discussed based on both pressure measurements and underwater images. Despite the reduction of the pressure peak intensity, it is shown that the structural deformation leads to an increase in the total loading up to 50% for the test conditions examined in this study. It is also observed that in presence of large structural deformations the hydrodynamic loads do not obey the scaling that works in the case of the thick plates, and some practical conclusions about the scaling of tests in presence of a strong fluid-structure interaction are provided.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Emanuele Spinosa, Alessandro Iafrati. 2021-05-13. Experimental Investigation of the Fluid-Structure Interaction during the Water Impact of Thin Aluminium Plates at High Horizontal Speed. https://doi.org/10.1016/j.ijimpeng.2020.103673

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗