Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2105.10308

Effects of capillary number and flow rates on the hydrodynamics of droplet generation in T-junction microfluidic systems

Akepogu Venkateshwarlu·Ram Prakash Bharti
View original source ↗Read source document ↗Export metadata ↓

Abstract

The hydrodynamics of droplets is significant in wide-ranging applications involving immiscible fluids and emulsions in food and pharmaceutical. The control and manipulation of droplets are primarily a function of flow governing and geometrical parameters. The finite element and level set approaches are used in this work to explore the influences of capillary number (Ca) and flow rate ratio (Qr) of dispersed and continuous phases on hydrodynamics of droplet generation in two-phase flow through T-junction cross-flow microfluidic device. A mathematical model based on a mass continuity, Navier-Stokes, and level set equations are solved computationally using the Eulerian framework for Ca = 1e-4 - 1 and Qr =0.1 - 10. Both immiscible phases, having equal density and unequal viscosity, flow (Re=0.1) through equal-sized channels. In particular, instantaneous phase flow field, droplet size, droplet detachment time and generation frequency are presented and discussed as a function of governing parameters (Ca and Qr). Considered parametric space is characterized as squeezing, first transition, dripping, second transition, parallel, and jet flow regimes. In contrast to threshold Ca ~ 0.01 in earlier studies, squeezing regime exists for all Ca and Qr = 2- 10. Flow regimes are also mapped into droplets and non-droplet zones. Threshold interfacial Ca, defining the boundary between droplet and non-droplet zones, scales quadratically with Qr. Droplet dynamics shows a complex dependence on Ca and Qr. Droplet length varies linearly with Qr in squeezing regime whereas power-law variation with Ca and Qr in dripping regime. Droplet frequency shows a power-law function of Ca and Qr in droplet zone. Present results compare excellently with earlier limited experimental and numerical studies. Finally, present results and predictive correlations can guide engineering and design of droplet microfluidics devices.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Akepogu Venkateshwarlu, Ram Prakash Bharti. 2021-05-21. Effects of capillary number and flow rates on the hydrodynamics of droplet generation in T-junction microfluidic systems. https://doi.org/10.1016/j.jtice.2021.07.045

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗