Pore-scale analysis of gas injection in gas-condensate reservoirs

Paula Reis; Marcio Carvalho

Home/Archive/arXiv

arXiv · 2108.07072

Pore-scale analysis of gas injection in gas-condensate reservoirs

Paula Reis·Marcio Carvalho

View original source ↗Read source document ↗Export metadata ↓

Abstract

Condensate banking around wellbores can significantly shorten the production from gas-condensate reservoirs. Different approaches to mitigate this issue have been proposed in the literature, among which gas injection comes out with promising results. With this method, pressure maintenance and condensate re-vaporization can be achieved, lessening the flow blockage caused by liquid dropout and accumulation in the porous medium. While gas injection in gas-condensate reservoirs has been largely investigated at the meso and macro scales, data regarding the method's efficiency at the micro-scale are scarce. Therefore, the effects of local changes in gas and condensate properties stemmed from the interaction between injected and reservoir fluids at the pore-scale are poorly understood. In order to evaluate how these changes affect the transport in porous media, a compositional pore-network model was used to reproduce gas injection in a sandstone sample following condensate accumulation. C1, C2, CO2, N2, and produced gas were tested as the candidates for condensate banking remediation at different pressure levels. After gas flooding, condensate saturation, heavy component recovery, and gas relative permeability were quantified to appraise the achieved gas flow improvement. The results indicated that C2 and CO2 were the most effective gases to clear the accumulated condensate and re-establish the gas flow. Conversely, C1 and N2, especially mixed with the produced fluids, displayed the least favorable results, and could even lead to gas flow impairment.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Paula Reis, Marcio Carvalho. 2021-08-16. Pore-scale analysis of gas injection in gas-condensate reservoirs. https://arxiv.org/abs/2108.07072

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗