Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2110.13055

Numerical Modeling of Ion Transport and Adsorption in Porous Media: A Two-scale Study for Capacitive Deionization Desalination

Min Liu·John Waugh·Siddharth Komini Babu·Jacob S. Spendelow·Qinjun Kang
View original source ↗Read source document ↗Export metadata ↓

Abstract

A two-scale model is presented to simulate the dynamic ion transport and adsorption processes in porous electrodes used for capacitive deionization (CDI). At the pore scale, the Stokes equation governing water flow in porous CDI electrodes is solved using the lattice Boltzmann method and Nernst-Planck equations describing ion transport is solved using the finite volume method. The ion adsorption process is considered at the surface of carbon electrodes. At the continuum scale, Darcy equation and advection-diffusion equation governing water flow and solute transport through CDI cells are solved using OpenFOAM. After validation against analytical solutions and previously published results, the model is used to study the coupled water flow, ion transport and adsorption at the pore and continuum scales. In the pore-scale modeling, the effect of electrode microstructure, electrical potential and flow velocity on the adsorption processes is quantitatively investigated, and the relative importance of various parameters is determined. In addition, the average adsorption rate derived from the pore-scale simulations is used in the continuum model to simulate water desalination in a flow-through CDI cell. The evolution of salt concentration during desalination has been quantified. It is found that the electrode adsorption capability has a direct influence on overall ion adsorption. Results also demonstrate that a narrower spacer between the two electrodes allows for faster ion adsorption. The presented model provides a numerical tool to quantitatively analyze the ion transport and adsorption in porous electrodes. It can help improve the fundamental understanding of the adsorption processes in porous electrodes for capacitive deionization.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Min Liu, John Waugh, Siddharth Komini Babu, Jacob S. Spendelow, Qinjun Kang. 2021-10-25. Numerical Modeling of Ion Transport and Adsorption in Porous Media: A Two-scale Study for Capacitive Deionization Desalination. https://arxiv.org/abs/2110.13055

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗