Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2203.03926

Numerical simulation of sound propagation in and around ducts using thin boundary elements

Wolfgang Kreuzer
View original source ↗Read source document ↗Export metadata ↓

Abstract

Investigating the sound field in and around ducts is an important topic in acoustics, e.g. when simulating musical instruments or the human vocal tract. In this paper a method that is based on the boundary element method in 3D combined with a formulation for infinitely thin elements is presented. The boundary integral equations for these elements are presented, and numerical experiments are used to illustrate the behavior of the thin elements. Using the example of a closed benchmark duct, boundary element solutions for thin elements and surface elements are compared with the analytic solution, and the accuracy of the boundary element method as function of element size is investigated. As already shown for surface elements in the literature, an accumulation of the error along the duct can also be found for thin elements, but in contrast to surface elements this effect is not as big and a damping of the amplitude cannot be seen. In a second experiment, the impedance at the open end of a half open duct is compared with formulas for the radiation impedance of an unflanged tube, and a good agreement is shown. Finally, resonance frequencies of a tube open at both ends are calculated and compared with measured spectra. For sufficiently small element sizes frequencies for lower harmonics agree very well, for higher frequencies a difference of a few Hertz can be observed, which may be explained by the fact that the method does not consider dampening effects near the duct walls. The numerical experiments also suggest, that for duct simulations the usual six to eight elements per wavelength rule is not enough for accurate results.

Explore related subjects

math.NAcs.NA

Keep this discovery

BibTeXRIS

Wolfgang Kreuzer. 2022-03-08. Numerical simulation of sound propagation in and around ducts using thin boundary elements. https://doi.org/10.1016/j.jsv.2022.117050

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Stress-divergence, Laplacian, and rotational forms of the incompressible Navier--Stokes equations with variable viscosity

In the Navier--Stokes equations, incompressibility allows rewriting the viscous term in various forms leading to distinct numerical properties and flow descriptions. Furthermore, models accounting for non-Newtonian, thermal or turbulent effects often break the constant-viscosity assumption, thereby producing additional consistency terms. In this context, the present work compares the classical symmetric-gradient diffusion term with more recent variable-viscosity generalizations of the Laplacian and rotational forms. We discuss, analyze and test their differences with respect to implementation, efficiency, numerical stability and outflow boundary conditions. With a focus on time-dependent flows, we consider second-order implicit-explicit (IMEX) temporal discretizations aimed at improving efficiency and numerical stability. Through a rigorous stability analysis, we show how selected explicit treatments can bypass algorithmic nonlinearities without inducing CFL conditions. Our numerical results highlight important differences between the three viscous formulations---especially in the presence of outflow boundaries, for which the generalized Laplacian form proves more suitable in diffusion-dominated regimes. %(as widely known for constant viscosity).

math.NA↗
arXiv2026

Full-window branch discovery and loss-selected EnKF continuation for data assimilation

We develop a framework for offline full-window branch discovery, optionally followed by online continuation with an ensemble Kalman filter (EnKF). Three mechanisms drive the branch search: adjoint path-kernel (APK) differentiation balances kernel differentiation and correction-stabilized path perturbation, shifting the optimization from exploration to exploitation; an optimized Gaussian initial law broadens the search over initial-state basins; and loss-weighted mixing across independent runs recombines successful path components. We may then select an interior state using a local loss and continue online with an EnKF. In 40-dimensional Lorenz-96 experiments, the mean offline path RMSE of APK is 4.3 times smaller than that of population weak-$\mathrm{4D\text{-}Var}_x$. The resulting APK-EnKF method has a mean online RMSE 64 times smaller than that of ordinary EnKF.

math.NA↗
arXiv2026

A variational physics-informed graph neural network for heterogeneous solid mechanics

Stress localization in heterogeneous solids is governed by the bimaterial interface, where the displacement field remains $C^0$-continuous, while in-plane stresses jump due to the stiffness mismatch. Coordinate-based physics-informed neural networks (PINNs) represent this jump via a prescribed regularization width or a weighted interface penalty, making their accuracy sensitive to how phase-contrast changes are handled. This work presents a variational, label-free physics-informed graph neural network (PI-GNN) in which the heterogeneity is carried by the discretization rather than by the trial field. The solver operates on a conforming adaptive mesh graph, assigns constitutive behavior per element, and minimizes the discrete total potential energy as a single unweighted objective in which only first derivatives appear. The discrete energy on piecewise-linear elements coincides with the finite element (FE) Ritz functional. Dirichlet conditions are enforced by construction, with no penalty term, no interface weight, and no prescribed transition width. Using one fixed architecture, optimizer, and loss across small-strain elasticity and finite-strain Neo-Hookean hyperelasticity in two and three dimensions, the von Mises error remains below $3.58\%$ across a stiffness-contrast sweep spanning $(E_{\mathrm{inc}}/E_{\mathrm{mat}}\in[10^{-2},10^{2}])$, where a strong-form PINN degrades to $5.58\%$, and its displacement error reaches $7.66\%$ against $0.49\%$ for the PI-GNN. A trained network halves the ($\sigma_{xx}$) error of an energy-based PINN ($5.01\%$ versus $10.94\%$). Training cost exceeds a single FE solve by more than an order of magnitude, so the construction is a variationally consistent, penalty-free interface representation for parametric surrogates and inverse identification rather than a replacement for a one-off FE analysis.

math.NA↗