Impact of interfaces on photoluminescence efficiency of high indium content InGaN quantum wells

Paweł Wolny; Henryk Turski; Grzegorz Muziol; Marta Sawicka; Julita Smalc-Koziorowska; Joanna Moneta; Anna Feduniewicz-Żmuda; Szymon Grzanka; Czesław Skierbiszewski

arXiv · 2206.10296

Impact of interfaces on photoluminescence efficiency of high indium content InGaN quantum wells

Paweł Wolny·Henryk Turski·Grzegorz Muziol·Marta Sawicka·Julita Smalc-Koziorowska·Joanna Moneta·Anna Feduniewicz-Żmuda·Szymon Grzanka·Czesław Skierbiszewski

View original source ↗Read source document ↗Export metadata ↓

Abstract

InGaN-based light emitting diodes (LEDs) are known to suffer from low electron and hole wavefunction overlap due to high piezoelectric field. Staggered InGaN quantum wells (QWs) have been proposed to increase the wavefunction overlap and improve the efficiency of LEDs especially for long wavelength emitters. In this work we evidence that the growth of staggered QWs has also another beneficial effect as it allows to reduce the formation of defects, responsible for nonradiative Shockley-Read-Hall recombination, at the bottom interface of the QW. Staggered QWs comprised an InGaN layer of an intermediate In content between the barrier and the QW. We show that insertion of such a layer results in a significant increase of the luminescence intensity, even if the calculated wavefunction overlap drops. We study the dependence of the thickness of such an intermediate In content layer on photoluminescence (PL) intensity behavior. Staggered QWs exhibit increased cathodoluminescence (CL) homogeneity that is a fingerprint of lower density of defects, in contrast to standard QWs for which high density of dark spots are observed in QW emission mapping. Transmission electron microscopy of standard QWs revealed formation of basal-plane stacking faults (BSFs) and voids that could have resulted from vacancy aggregation. Stepwise increase of the In content in staggered QWs prevents formation of point defects and results in an increased luminescence efficiency. The In composition difference between the barrier and the well is therefore a key parameter to control the formation of point defects in the high-In content QWs, influencing the luminescence efficiency.

Explore related subjects

physics.optics cond-mat.mtrl-sci

Keep this discovery

BibTeX RIS

Paweł Wolny, Henryk Turski, Grzegorz Muziol, Marta Sawicka, Julita Smalc-Koziorowska, Joanna Moneta, Anna Feduniewicz-Żmuda, Szymon Grzanka, Czesław Skierbiszewski. 2022-06-21. Impact of interfaces on photoluminescence efficiency of high indium content InGaN quantum wells. https://arxiv.org/abs/2206.10296

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗

arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗