Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2207.04400

Single Relaxation Time and Multiple Revised Matrix Lattice Boltzmann Simulations of Forced Isotropic Turbulence

Waleed Abdel Kareem·Pietro Asinari·Sauro Succi·Seiichiro Izawa·Yu Fukunishi
View original source ↗Read source document ↗Export metadata ↓

Abstract

The single relaxation time (SRT) and the revised matrix (RM) lattice Boltzmann models are compared for simulations of three dimensional forced isotropic turbulence with resolutions of 128^3 and 256^3, respectively. The forcing technique by Guo et al. (2002) is applied with the two models using the same parameters and conditions. Some new aspects and results have been confirmed such as the superiority of the MRT model to simulate forced turbulence and using the Courant-Friedichs-Lewy condition (CFL) (Courant et al., 1967) by multiplying the velocity input with the coefficient CFL < 1.0 to overcome the stability problem and divide the output velocity data by the same CFL. The initial velocity field is chosen as u(x; 0) = 0 and the force is injected at low wave-numbers with a fixed forcing amplitude to 10^-4 for all cases. The single relaxation time is set to 0.503 in all SRT simulations. Results show that the obtained turbulent velocity fields yield universal characteristics as proven in previous theoretical, experimental and numerical studies. The Taylor Reynolds number for the simulations are found as SRT: R = 62 and MRT : R = 65 for 1283 and SRT: R= 107 and MRT: R = 82 for the case of 2563, respectively. To test the weak incompressibility for the SRT model in comparison to the MRT model, the density probability distribution function (PDF) is depicted and it is found that ? is almost unity at all timesteps for the MRT case, while a clear disturbance about unity is observed for the SRT case.

Explore related subjects

physics.flu-dynmath-phmath.MP

Keep this discovery

BibTeXRIS

Waleed Abdel Kareem, Pietro Asinari, Sauro Succi, Seiichiro Izawa, Yu Fukunishi. 2022-07-10. Single Relaxation Time and Multiple Revised Matrix Lattice Boltzmann Simulations of Forced Isotropic Turbulence. https://arxiv.org/abs/2207.04400

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗