Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2208.10430

Experimental And Numerical Studies Of Interaction Between Liquid Droplets And Hot Surfaces Under Different Conditions

Subhasish Guchhait·Pratim Kumar
View original source ↗Read source document ↗Export metadata ↓

Abstract

In the present paper, experimental and numerical studies of interaction between different liquid droplets with different hot metal surfaces had been carried out and the obtained results were interpreted using graphs and pictures. Droplet impact, spreading, break-up, and leidenfrost phenomenon were observed with the help of video camera at 100 fps. The interaction studies were done at different surface temperatures and different droplet impinging velocities. Three metals and three liquids were selected for the present study. Copper, Aluminium and Steel were selected as metals with different roughness factors and at different temperatures, while in liquid entities, Methanol, Ethanol and Kerosene (Water was also used in some portion) were selected. The selections of the metals were based on thethermal diffusivity property as it influences the thermal interaction between droplet and the hot metal surface. The temperature range of metal surface was kept from 150{\deg} C to 425{\deg}C and the impinging velocity range of droplets were in the range of 2.4 - 4.9 m/s. For computational studies Ansys Fluent R3-2019 version was used. Numerical study for the interaction process was carried out using Volume of Fluid (VOF) method, solving Navier-Stokes and energy equations in a 2D-geometry transient simulation. Parameters like surface temperature, heat flux, and spreading ratio with respect to Weber number change were investigated and discussed in the present paper. The output of this study will be useful to understand the physical mechanisms better and to develop novel models for effective spray cooling system designs. The results show that for a lower value of Weber number, after impact the droplets spread less wide compare to high Weber number. The spreading ratio of droplets was almost constant or uniform for different surface temperature and it depends only on the surface roughness.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Subhasish Guchhait, Pratim Kumar. 2022-08-22. Experimental And Numerical Studies Of Interaction Between Liquid Droplets And Hot Surfaces Under Different Conditions. https://arxiv.org/abs/2208.10430

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗