SearcharxivSearch

arXiv · 2209.00988

A lightweight hybrid CNN-LSTM model for ECG-based arrhythmia detection

Abstract

Electrocardiogram (ECG) is the most frequent and routine diagnostic tool used for monitoring heart electrical signals and evaluating its functionality. The human heart can suffer from a variety of diseases, including cardiac arrhythmias. Arrhythmia is an irregular heart rhythm that in severe cases can lead to heart stroke and can be diagnosed via ECG recordings. Since early detection of cardiac arrhythmias is of great importance, computerized and automated classification and identification of these abnormal heart signals have received much attention for the past decades. Methods: This paper introduces a light deep learning approach for high accuracy detection of 8 different cardiac arrhythmias and normal rhythm. To leverage deep learning method, resampling and baseline wander removal techniques are applied to ECG signals. In this study, 500 sample ECG segments were used as model inputs. The rhythm classification was done by an 11-layer network in an end-to-end manner without the need for hand-crafted manual feature extraction. Results: In order to evaluate the proposed technique, ECG signals are chosen from the two physionet databases, the MIT-BIH arrhythmia database and the long-term AF database. The proposed deep learning framework based on the combination of Convolutional Neural Network(CNN) and Long Short Term Memory (LSTM) showed promising results than most of the state-of-the-art methods. The proposed method reaches the mean diagnostic accuracy of 98.24%. Conclusion: A trained model for arrhythmia classification using diverse ECG signals were successfully developed and tested. Significance: Since the present work uses a light classification technique with high diagnostic accuracy compared to other notable methods, it could successfully be implemented in holter monitor devices for arrhythmia detection.

Explore related subjects

Keep this discovery

BibTeXRIS

Negin Alamatsaz, Leyla s Tabatabaei, Mohammadreza Yazdchi, Hamidreza Payan, Nima Alamatsaz, Fahimeh Nasimi. 2022-08-29. A lightweight hybrid CNN-LSTM model for ECG-based arrhythmia detection. https://arxiv.org/abs/2209.00988

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Load Balancing in Multi-Shell LEO Satellite Networks with Successive Interference Cancellation

Multi-shell low Earth orbit (LEO) networks can increase service opportunities, but altitude-dependent propagation can concentrate traffic on lower shells and create strong inter-shell interference under full frequency reuse. This paper develops a mathematical framework for load balancing in multi-shell LEO satellite networks. Satellites on each shell form an independent spherical Poisson point process (SPPP), and the typical user associates with one of the per-shell serving satellites through a shell-dependent biased received-power rule, with receiver-side successive interference cancellation (SIC) under full frequency reuse. Shell-wise association probabilities, conditioned serving-distance distributions, and the rate coverage probability under shell-dependent traffic loads are derived and validated by simulation. The results show that shell-dependent biasing alleviates lower-shell traffic concentration and improves rate coverage, while receiver-side SIC mitigates the dominant lower-shell interference experienced by users associated with upper shells. Load balancing provides its largest rate-coverage gain in traffic hotspots, while SIC becomes more valuable as receive-side isolation weakens. With a fixed satellite budget, distributing satellites across multiple shells can further improve hotspot rate coverage by adding shell-wise serving opportunities.

eess.SP

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

eess.SP

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

eess.SP