Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2210.00622

Microwave probe sensing location for Venturi-based real-time multiphase flowmeter

Mengke Zhan·Cheng-Gang Xie·Jian-Jun Shu
View original source ↗Read source document ↗Export metadata ↓

Abstract

Real-time in-line interpretation of liquid properties is important for multiphase flow measurements. Therefore, it would be desirable to have a sensor, such as a microwave sensor, which can continuously measure the salinity of a flow. In addition to salinity measurement, the microwave sensor can also measure water fraction, which is required for a multiphase flowmeter based on single-energy gamma-ray attenuation; however, choosing a suitable probe sensing location for a microwave salinity sensor in a multiphase flowmeter can be challenging, as the sensor needs to be located at near-wall liquid-rich region to accommodate a wide range of flow conditions. Currently, a microwave sensor is installed in the lower area of a horizontal blind-tee inlet spool of a multiphase flowmeter for salinity measurement. Integrating the microwave sensor into the vertically mounted multiphase flowmeter can reduce the flowmeter (carbon) footprint and manufacturing costs and can improve water-to-liquid ratio measurement due to faster local oil-water mixing. The associated challenge is that the sensor needs to be located at near-wall liquid-rich region to accommodate a wide range of flow conditions, including high gas-volume-fraction flows, where the near-wall liquid layer present in the vertical pipe is usually very thin. In this study, computational fluid dynamics modeling is used to evaluate the suitability of four different sensing locations along the vertical cross-section of a Venturi-based multiphase flowmeter based on near-wall liquid-richness. The results show that the Venturi inlet is the most suitable location for microwave sensor measurement, compared to the mid-convergence section, the mid-divergence section, and the Venturi outlet for a range of inlet liquid-volume-fractions. The findings have been validated by experimental microwave sensor measurements in a multiphase flow loop facility.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Mengke Zhan, Cheng-Gang Xie, Jian-Jun Shu. 2022-10-02. Microwave probe sensing location for Venturi-based real-time multiphase flowmeter. https://doi.org/10.1016/j.petrol.2022.111027

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗