Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2210.01923

Plunging Breakers - Part 2. Droplet Generation

Martin A. Erinin·Chang Liu·Sophie D. Wang·Xinan Liu·James H. Duncan
View original source ↗Read source document ↗Export metadata ↓

Abstract

The positions, diameters ($d\geq 100$ $\mu$m), times and velocities of droplets generated by three plunging breaking waves are measured as the droplets move up across a measurement plane located 1.2 cm above the highest point reached by the crests during breaking. The three breakers are created by dispersively focused wave packets that differ primarily only through the overall amplitude of the wave maker motion used to generate them. The breakers are designated qualitatively by their intensities: weak, moderate and strong. The droplets are measured with two in-line cinematic holographic systems operating at 650 holograms per second with measurement volumes that span the width of the tank. In combination with the wave profile measurements described in Part 1 of this two part paper, the droplet measurements are used to explore the mechanisms of droplet generation and the effects of these mechanisms on the measured properties of the droplets and their motion. It is found that there are four major mechanisms for droplet production, closure of the indentation between the top surface of the plunging jet and the splash that it creates (labeled Region I-A), the bursting of large bubbles that were entrapped under the plunging jet at impact, splashing and bubble bursting in the turbulent zone of the front face of the wave (combined with the large bursting bubbles in a region labeled I-B) and the bursting of small bubbles that reach the water surface at the crest of the nonbreaking wave following the breaker (Region II). The droplet diameter distributions for the entire droplet set for each breaker contain separate small- and large-diameter regions of power law behavior that cross at a diameter, $d_i$, which increases monotonically from 820 $\mu$m to 1480 $\mu$m from the weak to the strong breaker, respectively. Similar power law behavior is found in Regions I-A and I-B.

Explore related subjects

physics.flu-dynphysics.geo-ph

Keep this discovery

BibTeXRIS

Martin A. Erinin, Chang Liu, Sophie D. Wang, Xinan Liu, James H. Duncan. 2022-10-04. Plunging Breakers - Part 2. Droplet Generation. https://arxiv.org/abs/2210.01923

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗