Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2302.09568

Aerodynamic performance enhancement and noise reduction for Darrieus vertical axis wind turbines: V-shaped blades and trailing-edge serrations

Jie Su·Yu Tu·Limin Kuang·Rui Zhang·Yixiao Shao·Dai Zhou·Zhaolong Han·Kai Zhang
View original source ↗Read source document ↗Export metadata ↓

Abstract

The Darrieus vertical axis wind turbines (VAWTs) are one of the mainstream devices for wind energy utilization in the urban areas. The market's pursuit of high wind energy conversion efficiency promotes the research on improving the wind turbine power coefficient while reducing noise. This paper makes further investigation on the aerodynamics and aeroacoustics of a small VAWT with V-shaped blades and trailing-edge serrations. The feasibility of utilizing the Reynolds-Averaged Navier-Stokes SST k-omega turbulence model and the FW-H method is verified against experiments. The studied V-shaped blades can effectively improve the power performance of VAWT over a wide range of tip speed ratios under normal wind speed conditions, and the trailing-edge serrations will also slightly increase the power output of V-bladed VAWT at the optimal tip speed ratio. The power coefficient of the V-bladed wind turbine with trailing-edge serrations is about 28.3% higher than that of the original turbine. In addition, a dumbbell-shaped noise directivity distribution was first discovered in the VAWT compared with the traditional elliptical distribution. The V-bladed VAWT generated less low-frequency noise and the trailing-edge serrations realized the expected noise reduction effect. Practically, this study proposes a feasible solution for the design of high-efficiency and low-noise wind turbines.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Jie Su, Yu Tu, Limin Kuang, Rui Zhang, Yixiao Shao, Dai Zhou, Zhaolong Han, Kai Zhang. 2023-02-19. Aerodynamic performance enhancement and noise reduction for Darrieus vertical axis wind turbines: V-shaped blades and trailing-edge serrations. https://arxiv.org/abs/2302.09568

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗