Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2302.11817

Effect of channel dimensions and Reynolds numbers on the turbulence modulation for particle-laden turbulent channel flows

Naveen Rohilla·Siddhi Arya·Partha Sarathi Goswami
View original source ↗Read source document ↗Export metadata ↓

Abstract

The addition of particles to turbulent flows changes the underlying mechanism of turbulence and leads to turbulence modulation. Different temporal and spatial scales for both phases make it challenging to understand turbulence modulation via one parameter. The important parameters are particle Stokes number, mass loading, particle Reynolds number, fluid bulk Reynolds number, etc., that act together and affect the fluid phase turbulence intensities. In the present study, we have carried out the large eddy simulations for different system sizes (2{\delta}/dp = 54, 81, and 117) and fluid bulk Reynolds numbers (Re_b = 5600 and 13750) to quantify the extent of turbulence attenuation. Here, {\delta} is the half-channel width, dp is the particle diameter, and Re_b is the fluid Reynolds number based on the fluid bulk velocity and channel width. The point particles are tracked with the Lagrangian approach. The scaling analysis of the feedback force shows that system size and fluid bulk Reynolds number are the two crucial parameters that affect the turbulence modulation more significantly than the other. The streamwise turbulent structures are observed to become lengthier and fewer with an increase in system size for the same volume fraction and fixed bulk Reynolds number. However, the streamwise high-speed streaks are smaller, thinner, and closely spaced for higher Reynolds numbers than the lower ones for the same volume fraction. In particle statistics, it is observed that the scaled particle fluctuations increase with the increase in system size while keeping the Reynolds number fixed. However, the scaled particle fluctuations decrease with the increase in fluid bulk Reynolds number for the same volume fraction and fixed system size. The present study highlights the scaling issue for designing industrial equipment for particle-laden turbulent flows.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Naveen Rohilla, Siddhi Arya, Partha Sarathi Goswami. 2023-02-23. Effect of channel dimensions and Reynolds numbers on the turbulence modulation for particle-laden turbulent channel flows. https://doi.org/10.1063/5.0147638

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗