A novel floating piezoelectric energy harvesting from water waves: fully-coupled simulation

Erfan Rajabi Khorramdarreh; Mohammad Mostafa Mohammadi; Jafar Ghazanfarian

Home/Archive/arXiv

arXiv · 2306.11901

A novel floating piezoelectric energy harvesting from water waves: fully-coupled simulation

Erfan Rajabi Khorramdarreh·Mohammad Mostafa Mohammadi·Jafar Ghazanfarian

View original source ↗Read source document ↗Export metadata ↓

Abstract

A fully-coupled-fluid-structure-piezoelectric model is presented based on the finite element method that is capable of modeling piezoelectric harvesters in the presence of free-surface flow and floating lightweight harvesters with arbitrary movements. The Navier-Stokes equations and the phase-field method are employed to describe the free-surface waves. Equations of the conservation of linear momentum in company with the piezoelectric constitutive relations in the strain-charge form are utilized to obtain solid deformation and the electric field intensity. According to the results, attaching mass to the tip of the beam leads to 13.5% rise in the output voltage compared to the state without the attached mass. Another studied factor was the influence of the load resistance on voltage and the output power. The generated voltage grows along with the load resistance until it reaches a constant value. However, the power has an optimum load resistance that is 2.61 times higher than the reference state. The beam's inclination is significant in effectively exploiting water waves due to raising the root mean square (RMS) value of the voltage by 89.53% at an angle of 40 degrees relative to the vertical state. By altering the thickness of the beam from 1 mm to the value of 1.5 mm, the RMS voltage exhibits a considerable upward change of 66%. By increasing the length of the cantilever beam connected to the buoyant structure, and therefore, the indentation of the beam in the water, the output voltage grows, such that a beam with the length of 25 cm shows a 2.92 times increase in the output voltage relative to the beam with a length of 15 cm.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Erfan Rajabi Khorramdarreh, Mohammad Mostafa Mohammadi, Jafar Ghazanfarian. 2023-06-20. A novel floating piezoelectric energy harvesting from water waves: fully-coupled simulation. https://arxiv.org/abs/2306.11901

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗